What kind of oil do I put in my 2013 Ford Explorer?

Oil Type for 2013 Ford Explorer
The recommended oil type for the 2013 Ford Explorer is SAE 5W-20 and 5W-30. Ford advises using engine oils meeting the oil viscosity requirements SAE classifications and having the API Certification Seal. The engine oil capacity for the 2013 Ford Explorer 4.6L and 4.0L is 6 and 5 US quarts.
It’s important to note that the 2013 Ford Explorer does not have a 4.0 or 4.6L engine, as mentioned in one of the sources. The correct engine oil capacity for the 2013 Ford Explorer is as mentioned earlier.
Additionally, it’s mentioned that the 2.3L 4-cylinder engine uses SAE 5W-30 and can hold 5.7 quarts, while the 3.5L V6 prefers SAE 5W-20 and holds 6 quarts.
Ford also recommends using Motorcraft* motor oil for their vehicles, as it helps keep the engine clean, reduces overall wear, and maximizes performance.
In summary, for the 2013 Ford Explorer, the recommended oil types are SAE 5W-20 and 5W-30, and it’s advisable to use engine oils meeting the oil viscosity requirements SAE classifications and having the API Certification Seal.
If you have any further questions or need additional information, feel free to ask!

Can I use 5W-30 to Ford Explorer?

Motorcraft Semi-synthetic. 5w/30 in the Explorer, and 5w/20 in the F-150. Every 5000 miles. Motorcraft oil filters also.

What happens if you use synthetic blend instead of full synthetic?

For most vehicles, synthetic blend is a good choice. If your vehicle speficies that full synthetic is required, then a synthetic blend will not be okay – it could actually leave your engine vulnerable to damage.

Can I use 5W 30 instead of 5w20 in my Ford Explorer?

Can I use 5w30 instead of 5w20 in my Ford? The Ford owner’s manual states that 5w20 oil provides the best fuel economy and durability performance for your car’s engine. If you use the higher thickness (30 weight), your gas mileage will definitely go down.

Which engine oil is best for Ford Explorer?

Mobil 1 – Advanced Full Synthetic Motor Oil 5W-30, 1 Quart (Part No. 24812)

Does Ford recommend full synthetic oil?

Help keep the engine in your Ford or Lincoln vehicle running at its best with a synthetic motor oil that comes recommended by Ford Motor Company. Synthetic oil is engineered to create more lubrication and better performance in the engine of your Ford or Lincoln vehicle.

Can I use 5w30 instead of 5w20 in my Ford?

In 2011, Ford started recommending 5w30 for the turbocharged 3.5 Ecoboost engines, but they haven’t changed the recommendation for the non-turbo duratec. You can run both 5w20 or 5w30 safely on these engines (turbocharged and non-turbo). Both oils will work great.

Can I use 5W-30 instead of 5w20 in my Ford Explorer?

Can I use 5w30 instead of 5w20 in my Ford? The Ford owner’s manual states that 5w20 oil provides the best fuel economy and durability performance for your car’s engine. If you use the higher thickness (30 weight), your gas mileage will definitely go down.

Is it better to use 5w20 or 5w30?

Typically, a 5W-20 oil provides higher gas mileage than a 5W-30 due to its more effortless flow. However, the 5W-30 oil is still a suitable option where fuel efficiency is concerned. Using 5W-30 simply produces a bit less economy because moving an oil that is less freely flowing through the system consumes more energy.

What would happen if you put 5w30 instead of 5w20?

Using 5W-30 instead can reduce fuel economy and impede flow throughout the engine. While using it temporarily in a pinch likely won’t cause your engine lasting harm, remember that the engineers who built your engine did so with a specific viscosity oil in mind, meaning it’s best to stick with it.

What kind of oil does my 2013 Ford Explorer use?

AMSOIL 5W-30 100% Synthetic High-Mileage Motor Oil.