What kind of fuses for Subaru Forester?

Types of Fuses for Subaru Forester
The Subaru Forester uses various types of fuses for different electrical components. Here are some details about the fuses used in the Subaru Forester:
– Location of Fuse Boxes:
– The fuse box in the Subaru Forester is located in two main areas: behind the cover to the left of the steering wheel in the passenger compartment and in the engine compartment .
– Amp Rating and Circuit:
– The fuses in the instrument panel of the Subaru Forester have different amp ratings and are assigned to various circuits such as trailer hitch connector, door locking, front wiper deicer relay, combination meter, remote control rear view mirrors, seat heater relay, stop light, turn signal unit, and more.
– Specific Fuse Types:
– The Subaru Forester uses Auto Mini Fuses with a 20A rating for various purposes.
– Precautions and Maintenance:
– It’s important to note that the fuses are designed to melt during an overload to prevent damage to the wiring harness and electrical equipment. If any lights, accessories, or other electrical controls do not operate, it’s recommended to inspect the corresponding fuse and replace it if necessary.
In summary, the Subaru Forester uses a variety of fuses with different amp ratings and is equipped with specific Auto Mini Fuses for various purposes. It’s important to follow proper maintenance and precautions when dealing with the fuses in the vehicle.
If you need further details about specific fuse types or locations, it’s advisable to refer to the vehicle’s manual or consult a Subaru dealer for accurate information.

How do I choose a fuse for my car?

Here are the steps to size a 12V fuse:

1. Determine the maximum current that will be flowing through the circuit.
2. Choose a fuse with a current rating slightly higher than the maximum current.
3. Make sure the fuse’s voltage rating is at least equal to the circuit’s voltage.
4. Choose the appropriate fuse type for the circuit.

What is the most common car fuse type?

Mini blade fuses are currently the most common fuse used in modern vehicles. There is also the low profile Mini Blade fuse which utilises the same pin spacing as the Mini Blade fuse, but has a smaller plastic body. Mini Blade fuses are 10.9mm wide, 16.4mm tall and 3.8mm thick.

How do I know what fuses my car needs?

The most straightforward is to inspect the fuse itself, where the amperage rating is typically noted on or near the top of the fuse. The second is to check the fuse diagram in the vehicle, to understand which fuse type is in each slot.

How do I know what fuse to use in my car?

The rating is printed on the top of the fuse and can range from 1 amp to 50 amps or higher. Blade-type fuses should be replaced with one that matches the same amperage rating as the original.

How do I know which fuse to replace?

Check in your owners manual for the fuse position that protects the interior light circuit. Remove the fuse and hold it up to the light to see if it has blown. If it has replace with a fuse of the correct rating.

How do I know what fuse I need?

First, you will need to determine the maximum fuse rating in amperages by applying this formula for calculation: P (Watts) ÷ V (Voltage) = I (Amps). Next, you will need to calculate the minimum fuse rating or amperage by multiplying that total (the maximum amperage rating) by 125%.

What kind of fuses does a Subaru Outback use?

Mini Fuse 10A. Multi Purpose Fuse – 82210AJ10A – Genuine Subaru Part.

How to replace Subaru main fuse?

5 Steps To Changing A Blown Fuse

1. Step 1: Check Owner’s Manual.
2. Step 2: Turn Engine Off & Disconnect Battery.
3. Step 3: Open Fuse Box & Find Fuse.
4. Step 4: Remove & Inspect Fuse.
5. Step 5: Insert New Fuse.

Can I replace a fuse myself?

Replacing a fuse is a relatively easy, do-it-yourself home task that you can tackle with a little information and some electrical home safety savvy. If your home has a fuse box, the best advice is to plan ahead and become familiar with the electrical panel and with the types of fuses it requires.

What kind of fuse is in a 2010 Subaru Legacy?

Subaru Legacy Mini Fuse 20A
Fits the following Vehicles: 2010-2021 Subaru Legacy | 2.4R F/R-O, 2.4R Limited, 2.4R Touring, 2.5GT Limited, 2.5GT Premium, 2.5i, 2.5i Limited, 2.5i Premium, 2.5i Sport, 2.5i Touring, 3.6R, 3.6R Limited, 3.6R Premium, 3.6R Touring.