The 2003 Ford Excursion is equipped with a Dana 50 front axle [[8]]. The Dana 50 axle is similar to the Dana 60 axle but has smaller internal differential components . It consists of a Dana 44 differential in a Dana 60 housing with 30 spline axles. The Dana 50 axle was used in the Excursion SUV until 2005.
Contents
- How do I identify my Ford Dana 60 front axle?
- How do I identify a Dana 44 front axle?
- What front axle is in a 2003 Ford Excursion?
- How do I know if I have a Dana 50 or Dana 60 front axle?
- What kind of axle is on the Ford Excursion?
- What years did Ford make the Dana 60?
- What trucks have Dana 60 front axles?
- What Ford trucks have Dana axles?
- What years did Ford use Dana 60?
- How do I identify my Ford axle?
How do I identify my Ford Dana 60 front axle?
Many Dana axles have the model ID cast into the fins or centersection. Look for a “44” or “60” cast into the reinforcement ribs. The number can usually be found on the lower right side rib below the differential cover, but it may also be found on other ribs or on top of the main cast structure.
How do I identify a Dana 44 front axle?
But it’s a flat casting. So here’s one off the vehicle. And it’s the same one flat casting nothing machine six bolt spindle. So this is on 1/2 ton and 3/4 ton axles. So this is a 71 to 76.
What front axle is in a 2003 Ford Excursion?
2000-2005 Ford Excursion 4x4s use Dana 50 monobeam front axles. Externally, the Model 50 Axle looks almost exactly like a Dana 60 used on most of the Super Duty 4x4s of the same vintage, however, all the internal differential components are substantially smaller.
How do I know if I have a Dana 50 or Dana 60 front axle?
The best way to determine what axle model you have is to look at the axle ID tags. The Dana Axle Bill of Material Number will tell us what your axle model is, the ratio, and what parts your particular axle was built with. There should be a metal Dana BOM Tag held on by two of the diff cover bolts.
What kind of axle is on the Ford Excursion?
The rear axle for all Excursions was a Sterling 10.5 axle. The four-wheel-drive models were equipped with a NV273 transfer case and Dana 50 front axle.
What years did Ford make the Dana 60?
Ford used Dana Super 60 Front Driving Axles in 2005-2016 F250, F350, F450, and F550 Super Duty 4×4 trucks. Each axle is built with a Bill of Material (BOM) Tag affixed to the differential cover by two cover bolts.
What trucks have Dana 60 front axles?
Ford uses Dana Super 60 Front Driving Axles in 2005 and newer F250, F350, F450, and F550 Super Duty 4×4 trucks. Each axle is built with a Bill of Material (BOM) Tag affixed to the differential cover by two cover bolts.
What Ford trucks have Dana axles?
Ford uses Dana Super 60 Front Driving Axles in 2005 and newer F250, F350, F450, and F550 Super Duty 4×4 trucks. Each axle is built with a Bill of Material (BOM) Tag affixed to the differential cover by two cover bolts. These axles will also…
What years did Ford use Dana 60?
2005-2016 Ford Dana Super 60 Front Axle Identification IDN-118. Ford uses Dana Super 60 Front Driving Axles in 2005 and newer F250, F350, F450, and F550 Super Duty 4×4 trucks.
How do I identify my Ford axle?
To determine the axle ratio of your vehicle, locate the two-digit axle code first, then use your vehicle’s towing guide to find the axle ratio that corresponds to that code. If your vehicle has a limited-slip differential, it will be noted as “Limited Slip.”