The 2016 Ford Explorer takes R-134a refrigerant, with a total freon capacity of 44.96 ounces. This information is important for maintaining and servicing the air conditioning system in the vehicle. If you need to recharge the freon, it’s essential to use the correct type and amount to ensure proper functioning of the A/C system.
Contents
- What kind of freon does a 2016 Ford Escape take?
- How do you recharge an AC 2016 Explorer?
- Can I use 134a instead of 1234yf?
- Can I recharge my car AC myself?
- What happens if you put R134a to R1234yf?
- Can I replace my car refrigerant R-1234yf with R134a?
- Can R134a be replaced with R1234yf?
- How much freon does a 2015 Ford Explorer take?
- Why is my AC not blowing in my 2016 Ford Explorer?
- What kind of freon does a Ford Explorer take?
What kind of freon does a 2016 Ford Escape take?
The 2016 Escape (which was charged with R-134a) used their YN-12-D oil (Ford Specification Number WSH-M1C231-B). That’s not the case for 2017, which requires YN-35 oil (Spec # WSS-M2C300-A2) to work with the new refrigerant R-1234yf.
How do you recharge an AC 2016 Explorer?
So you want to be in the yellow if you go into the red you are pretty much risking damaging your AC compressor. So that means you don’t want to overcharge it so just do it slowly and keep monitoring.
Can I use 134a instead of 1234yf?
Still, the answer is an emphatic, “No.” Not only would a retrofit of this type negate the environmental benefits of R-1234yf, but it would also be a violation of Federal Law under Section 203 of the Clean Air Act: “tampering” with a vehicle’s emissions control device.
Can I recharge my car AC myself?
You can save about $100 in labor costs by doing the car ac recharge job yourself. Stop at any auto parts store and pick up an R-134a A/C recharging kit. I used the A/C Pro Recharge Kit product because it came with a reusable gauge and a quick-connect fitting, and the refrigerant contained a seal conditioner additive.
What happens if you put R134a to R1234yf?
The mixing of R-134a with R-1234yf will change refrigerant pressure and may result in evaporator freeze-up on pressure control systems, reducing system airflow.
Can I replace my car refrigerant R-1234yf with R134a?
Vehicles with R-1234yf have different service fittings than R-134a vehicles to prevent cross-contamination with different refrigerants. Also, it’s illegal to put R-134a or any other refrigerant into a car originally equipped with R-1234yf.
Can R134a be replaced with R1234yf?
While R-1234yf could be the perfect replacement for R-134a, there is one major challenge with this new technology. The R-1234yf is much more reactive than R-134a. On the positive side, this higher reactivity is why R-1234yf is so much more friendly to the environment.
How much freon does a 2015 Ford Explorer take?
Capacities and Specifications
| Item | Quantity |
|---|---|
| Rear drive unit fill capacity. | 30.1 fl oz (890 ml) |
| Washer system fill capacity. | 1.2 gal (4.5 L) |
| Fuel tank fill capacity. | 13.7 gal (52 L) |
| Air conditioning refrigerant fill capacity. | 22.05 oz (0.625 kg) |
Why is my AC not blowing in my 2016 Ford Explorer?
The most common reasons a Ford Explorer ac isn’t working are a refrigerant leak, an electrical climate control issue, or a problem with the air conditioning compressor.
What kind of freon does a Ford Explorer take?
R134a
Ford refrigerant filling quantities R134a and 1234yf
| Model | Year of manufacture | Freon |
|---|---|---|
| Ford Galaxy 2.0/2.3 with rear air conditioning | 1995 – 2000 | R134a |
| Ford Focus III 1.6Ti-VCT/1.6SCTi/2.0TDCi | 2011 – 2014 | R134a |
| Ford Explorer (U2) 4.0iV6 | 03.1995 – 1998 | R134a |
| Ford Fiesta | 1999 – 2002 | R134a |
