AHG Auto Service » Make » Ford » What kind of differential fluid does a 2009 Ford Ranger take?

What kind of differential fluid does a 2009 Ford Ranger take?

Based on the search results, the 2009 Ford Ranger takes 80w90 differential fluid. The rear differential of the Ford Ranger requires approximately 2 1/2 quarts of fluid. It is recommended to use a hand pump to make it easier to add the new oil into the differential. Amsoil sells a pump that fits right on their bottles and makes it easy to add the fluid.
Please note that the front axle assembly of the 1998 and newer Ford Ranger uses a different style than the 1983-1997 models, so the process may vary for the front differential.
I hope this information helps! Let me know if you have any other questions.

What fluid should never be used in a rear differential?

Never, under any circumstances, put engine oil in your differential. This will result in devastating damages to your engine. Engine oil is much different than gear oil, mostly it cannot withstand high pressure. Therefore, engine oil should never be used in place of gear oil.

Can I substitute 75W90 for 80w90?

If 80W-90 is not available, 75W-90 should work. The 90 weight is a 90 weight. The issues that could happen are: The axle was validated nearer the 18.5 cPs, but the 75W is nearer the 13.5 cPs.

Is there a difference between front and rear differential fluid?

A front-wheel drive vehicle will use a transaxle, which is part of the transmission. Rear differential fluid is used for rear-wheel drive cars. Trucks use the same fluid in both the inter-axle differential and the rear differential.

What happens if you use the wrong differential fluid?

They found that whoever replaced the oil in the differential with the wrong viscosity was directly responsible for the damage caused to the front differential assembly and the four-wheel-drive (clutch) assembly.

What kind of rear differential fluid does a 2006 Ford Ranger take?

Ford Ranger FX4 / Sport / STX / XL / XLT 2006, SAE 80W-90 Premium Rear Axle Lubricant by Motorcraft®.

What kind of fluid goes in a rear differential?

There are two basic types of differential fluid: Mineral oil, which is a natural, crude oil-based fluid. Synthetic differential fluid, which is created with chemicals and can be fine-tuned for optimal performance.

Does it matter what differential fluid you use?

The best way to determine which differential fluid is correct for your application is to reference your vehicles owner’s manual. Using the appendix, locate the section under fluids, transmission fluid, transfer case fluid, or lubrication.

What kind of oil does a Ford Ranger rear diff take?

Capacities and Specifications

Part Recommended fluid
Front axle oil Motorcraft® SAE 80W-90 Premium Rear Axle Lubricant
Rear axle oil Motorcraft® SAE 80W-90 Premium Rear Axle Lubricant
Rear axle oil (LSD) Motorcraft® SAE 80W-90 Premium Rear Axle Lubricant
Rear axle friction modifier Motorcraft® Additive Friction Modifier

What is the difference between 75W90 and 75W140?

So, the difference between “75W90” and “75W140” is that at operating temperature, the 75W140 will be considerably thicker than the 75W90 but at room temperature they will be about the same viscosity.

Is there a big difference between 75W90 and 80w90?

SAE 75W-90 maintains a more consistent thickness, or viscosity, across a wide temperature range. It’s thicker when exposed to high heat and thinner under colder, wintry conditions than 80W-90.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment