The 2018 Ford EcoSport uses either DOT 3, DOT 4, or DOT 5 brake fluid. It is important to check your owner’s manual for the correct type to add, as it likely will be one of these types.
When adding brake fluid to your EcoSport, it’s crucial to check your owner’s manual for the correct type to add. If the brake fluid level is low, air may get into the circuit, and the brakes of your EcoSport will stop working altogether, which can be dangerous. It’s also important to handle brake fluid while wearing gloves, as it is corrosive, irritating, and toxic. Additionally, it should not be allowed to drip into paint or any plastic items because it will corrode them.
It’s always a good idea to consult the owner’s manual for specific details regarding the type and capacity of brake fluid for your 2018 Ford EcoSport.
Contents
- What oil does a Ford Ecosport 1.0 take?
- Does Ford EcoSport have transmission fluid?
- Can you mix DOT 3 and DOT 4?
- Should I use DOT 3 or 4?
- Does Ford recommend a specific brake fluid?
- Is it bad to use DOT 4 instead of DOT 3?
- What kind of oil does a 2018 Ford Ecosport use?
- What DOT brake fluid does my car need?
- What type of brake fluid does Ford use?
- What oil should I use for my Ford EcoSport?
What oil does a Ford Ecosport 1.0 take?
| Name | Specification |
|---|---|
| Engine Oil – SAE 5W-20 | WSS-M2C948-A |
| Antifreeze Super Plus Premium Ready Mix 2U2J-19544-xxxx | WSS-M97B44-D2 |
| Brake Fluid DOT 4 LV High Performance BU7J-M6C65-xxxx | WSS-M6C65-A2 |
| Automatic Transmission Oil P-ULV HU7J-M2C949-AB, HU7J-M2C949-BA | WSS-M2C949-A, |
Does Ford EcoSport have transmission fluid?
If you don’t change your Ford EcoSport transmission fluid, your transmission will have broken metal shavings and further corrosive material spread throughout the critical components of your Ford EcoSport.
Can you mix DOT 3 and DOT 4?
And Dot 4 are glycol ether-based fluids and the main difference lies in their boiling points DOT. 4 has a higher boiling point meaning it can handle higher temperatures without causing brake failure.
Should I use DOT 3 or 4?
DOT 4 brake fluid. The primary differences between the two include the following: DOT 3 brake fluid will absorb less water than DOT 4 from the air over time, meaning you’ll need to have your fluid changed less frequently. DOT 4 brake fluid has higher dry and wet boiling points, making it safer for higher temperatures.
Does Ford recommend a specific brake fluid?
Ford recommends using Motorcraft (Ford) DOT 4 LV High Performance Motor Vehicle Brake Fluid or equivalent meeting WSS-M6C65-A2. Use of any fluid other than the recommended fluid may cause degraded brake performance and not meet the Ford performance standards. Keep brake fluid clean and dry.
Is it bad to use DOT 4 instead of DOT 3?
You can absolutely use DOT4 in place of DOT3 brake fluid.
The only thing you’ll need to do is completely purge the system of the old DOT3 fluid to take advantage of the DOT4 features (higher boiling point both dry/wet). The only real difference between the two is how hot they can get before they boil.
What kind of oil does a 2018 Ford Ecosport use?
Notes: Full synthetic. 5W-20.
What DOT brake fluid does my car need?
DOT3
Most vehicles in the USA take DOT3 or 4 which are amber in color, like a light beer. They are glycol-based and will absorb moisture out of the air (hygroscopic is the technical term). Thus, you’ll want to keep the top of your bottle tight and don’t open the master cylinder reservoir unless needed.
What type of brake fluid does Ford use?
DOT 4
Hydraulic fluid in DOT 4 quality for brake and clutch systems of motor vehicles.
What oil should I use for my Ford EcoSport?
Ford recommends using Motorcraft®* motor oil for your Ford vehicle. Using the right oil helps keep your vehicle’s engine clean, reduces overall wear, and maximizes performance.
