The 2015 Subaru Forester uses brake fluid that meets the DOT 3 or DOT 4 specifications. It is important to use a brake fluid that meets these specifications to ensure proper performance and compatibility with the vehicle’s braking system.
Contents
- What brake fluid does a Subaru Forester use?
- How often should you change the brake fluid in a Subaru Forester?
- How much does it cost to change the brake fluid in a Subaru Forester?
- Is a brake fluid flush really necessary?
- Can you mix DOT 3 and DOT 4?
- What kind of brake fluid does a Subaru take?
- Can I use 5W-30 instead of 0w20 in Subaru Forester?
- What type of oil does a 2015 Subaru Forester use?
- What kind of brake fluid does a Subaru Forester take?
- What kind of brake fluid does a 2015 Forester take?
What brake fluid does a Subaru Forester use?
Subaru Forester Brake Fluid – SOA868V9220 – Genuine Subaru Part.
How often should you change the brake fluid in a Subaru Forester?
Every 30,000 Miles
Replace brake fluid. Check the brake lines and parking brake operation and service the braking system. Check the axle shaft condition and the front and rear axle boots. Inspect the operation of the Forester’s clutch.
How much does it cost to change the brake fluid in a Subaru Forester?
Competitive Service Pricing Available with Colonial Subaru
| Service: | Price: |
|---|---|
| Brake Fluid Exchange | $129.95 |
| Power Steering Fluid Service | $149.95 |
| Fuel Injection Cleaning Service | $149.95 |
| Replace In-Cabin Air Filter | $69.95 |
Is a brake fluid flush really necessary?
The brake fluid definitely needs flushing at service intervals. The brake fluid does get dirty and will turn black eventually. It also absorbs about 3% moisture a year. The moisture/water will eventually rust out the internal parts of your brake system and this can cost in the hundreds of dollars.
Can you mix DOT 3 and DOT 4?
And Dot 4 are glycol ether-based fluids and the main difference lies in their boiling points DOT. 4 has a higher boiling point meaning it can handle higher temperatures without causing brake failure.
What kind of brake fluid does a Subaru take?
Subaru’s come with DOT 3 fluid across the board, so if you want to improve the capacity of your brakes, and especially if you want to take your car to the track, you are going to need to replace that DOT 3 brake fluid with DOT 4 which will have a higher heat capacity.
Can I use 5W-30 instead of 0w20 in Subaru Forester?
If you drive a Subaru Forester with a non-turbo engine, it requires 0W-20. If you drive a model with a turbo engine, you’ll need 5W-30.
What type of oil does a 2015 Subaru Forester use?
5W-30
Oil Grade: SM
| Viscosity: | 5W-30 (All TEMPS) |
|---|---|
| Capacity: | 5.4 quarts (with filter). After refill check oil level. |
| Torque: | 31 ft/lbs (Oil Drain Plug) Install a new washer on the drain bolt. Only use an OE drain plug. |
| Notes: | (1) Synthetic oil is required. |
What kind of brake fluid does a Subaru Forester take?
Prestone – DOT 3 Brake Fluid: Synthetic, Prevents Corrosion, Safe For ABS, Disc, Drum Brakes, 50k miles, 12 oz (Part No. AS400)
What kind of brake fluid does a 2015 Forester take?
2015 Subaru Forester Brake Fluid – SOA868V9220 – Genuine Subaru Part.
