The recommended brake fluid for a 2014 Ford Focus is Motorcraft high performance Dot 4 LV. It is important to use the specified brake fluid to ensure proper performance and compatibility with the braking system of the vehicle. The service interval recommended by the factory specifications is every 30,000 miles.
To add brake fluid to your 2014 Ford Focus, follow these steps:
1. With the engine off, raise the hood and locate the brake master cylinder. It is usually located in the back of the engine bay, on the driver’s side.
2. Check the brake fluid level in the reservoir. If it is below the MIN line, carefully pry off the reservoir cap.
3. Add brake fluid until the level is just under the MAX line. Be careful not to overfill.
4. Clean the inside of the reservoir cap using a clean towel or lint-free cloth before putting it back on.
Remember to check the brake fluid regularly and top it off as needed to ensure proper brake system function. If you are unsure or uncomfortable performing this task, it is recommended to consult a professional mechanic or refer to the vehicle’s owner’s manual for detailed instructions.
Please note that the information provided is based on the search results available up until March 23, 2024, and it is always a good idea to consult the vehicle’s owner’s manual or contact a certified Ford dealership for the most accurate and up-to-date information regarding your specific vehicle model.
Contents
- Does it matter what brake fluid I use?
- Does Ford recommend a specific brake fluid?
- What happens if I put DOT 4 instead of DOT 3?
- Should I use DOT 3 or 4 brake fluid?
- Should I use DOT 3 or 4?
- What kind of brake fluid for Ford Focus?
- What kind of brake fluid does a 2014 Ford Fusion take?
- What is the difference between DOT 3 and DOT 4?
- Is it OK to use DOT 3 and DOT 4 together?
- Can I use DOT 3 instead of DOT 4?
Does it matter what brake fluid I use?
Although DOT 3 and DOT 4 fluids are all glycol-based, the chemical composition of each type of fluid is different, so it will have a different effect on the system. To make sure the system works as it should, the best thing to do is to keep using the brake fluid recommended by the manufacturer.
Does Ford recommend a specific brake fluid?
Ford recommends using Motorcraft (Ford) DOT 4 LV High Performance Motor Vehicle Brake Fluid or equivalent meeting WSS-M6C65-A2. Use of any fluid other than the recommended fluid may cause degraded brake performance and not meet the Ford performance standards. Keep brake fluid clean and dry.
What happens if I put DOT 4 instead of DOT 3?
The only thing you’ll need to do is completely purge the system of the old DOT3 fluid to take advantage of the DOT4 features (higher boiling point both dry/wet). The only real difference between the two is how hot they can get before they boil. The DOT4 will not harm your DOT3 system in any way.
Should I use DOT 3 or 4 brake fluid?
Compared to DOT 3, DOT 4 brake fluid has higher wet and dry boiling points, which yields better performance and higher braking temperatures and in high performance applications. Although DOT four is becoming more popular, you’re mainly going to see it in European nameplates.
Should I use DOT 3 or 4?
Compared to DOT 3, DOT 4 brake fluid has higher wet and dry boiling points, which yields better performance and higher braking temperatures and in high performance applications. Although DOT four is becoming more popular, you’re mainly going to see it in European nameplates.
What kind of brake fluid for Ford Focus?
Brake Fluid for FORD FOCUS: Change Interval and Recommended Types
| Parameter | Data |
|---|---|
| Replacement Interval | Every 2 years or as per service schedule |
| Type of Brake Fluid | DOT 3, DOT 4 |
| Boiling Point | Approx. 205°C (dry), 140°C (wet) for DOT 3; 230°C (dry), 155°C (wet) for DOT 4 |
| Viscosity | 700–1800 cSt at -40°C |
What kind of brake fluid does a 2014 Ford Fusion take?
DOT 4
Notes: 32 oz. Max DOT 4.
What is the difference between DOT 3 and DOT 4?
The primary differences between the two include the following: DOT 3 brake fluid will absorb less water than DOT 4 from the air over time, meaning you’ll need to have your fluid changed less frequently. DOT 4 brake fluid has higher dry and wet boiling points, making it safer for higher temperatures.
Is it OK to use DOT 3 and DOT 4 together?
For example, a braking system that has a brake fluid DOT 3 specification can use a DOT 4 or a DOT 5.1 fluid. Also, a system with a DOT 4 can be topped up with a DOT 5.1 without bleeding the system. However, never top up a DOT 4 system with a DOT 3 brake fluid.
Can I use DOT 3 instead of DOT 4?
Yes. DOT 3 brake fluid is compatible with DOT 4 brake fluid. However, DOT 4 offers a higher boiling point. DOT 5.1 is used in high-performance and heavy-duty applications due to its high boiling point.
