What kind of brake fluid does a 2014 Ford Flex take?

Brake Fluid for 2014 Ford Flex
The recommended brake fluid for the 2014 Ford Flex is DOT 4. It is important to use the correct type of brake fluid to ensure optimal performance and safety of the braking system. The brake fluid reservoir should be checked regularly, and the fluid level should be maintained between the MIN and MAX lines on the reservoir.
If you need to add brake fluid, it’s essential to use a completely clean towel or lint-free cloth to clean the inside of the reservoir cap before putting it back on. This helps prevent any dirt or debris from contaminating the brake fluid.
The service interval recommended by the factory specifications for changing the brake fluid is every 30,000 miles. It’s also important to note that brake fluid doesn’t last forever and should be changed within the recommended intervals to ensure the proper functioning of the braking system.
When adding or changing brake fluid, it’s advisable to use trusted brands like Motorcraft high performance Dot 4 LV or other reputable brands to maintain the quality and performance of the brake fluid.
It’s also worth noting that DOT 4 brake fluid has a higher boiling point compared to DOT 3, making it suitable for vehicles that may experience higher braking temperatures, such as those carrying heavy loads or towing trailers.

Does Ford recommend a specific brake fluid?

Ford recommends using Motorcraft (Ford) DOT 4 LV High Performance Motor Vehicle Brake Fluid or equivalent meeting WSS-M6C65-A2. Use of any fluid other than the recommended fluid may cause degraded brake performance and not meet the Ford performance standards. Keep brake fluid clean and dry.

Does it matter what brake fluid I use?

Although DOT 3 and DOT 4 fluids are all glycol-based, the chemical composition of each type of fluid is different, so it will have a different effect on the system. To make sure the system works as it should, the best thing to do is to keep using the brake fluid recommended by the manufacturer.

Does Ford use DOT 3 brake fluid?

They’re different – they have different applications. All these trucks are designed to use DOT3 – that’s what will give the best performance. Consider replacing the 3 rubber brake hoses when your system is apart for maintenance. Use the Dot 3 fluid.

What kind of brake fluid does a Ford Flex take?

Prestone – DOT 3 Brake Fluid: MAX Synthetic, Highest Grade, Superior Protection, 100k miles, 32 oz (Part No. AS410)

What is the best transmission fluid for Ford Flex?

Motorcraft – MERCON® LV Automatic Transmission Fluid ATF, 1 Quart (Part No. XT10QLVC) The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.

What happens if I put DOT 4 instead of DOT 3?

The only thing you’ll need to do is completely purge the system of the old DOT3 fluid to take advantage of the DOT4 features (higher boiling point both dry/wet). The only real difference between the two is how hot they can get before they boil. The DOT4 will not harm your DOT3 system in any way.

What type of brake fluid does Ford use?

DOT 4
Hydraulic fluid in DOT 4 quality for brake and clutch systems of motor vehicles.

Should I use DOT 3 or 4?

DOT 4 brake fluid. The primary differences between the two include the following: DOT 3 brake fluid will absorb less water than DOT 4 from the air over time, meaning you’ll need to have your fluid changed less frequently. DOT 4 brake fluid has higher dry and wet boiling points, making it safer for higher temperatures.

What kind of gas does a 2014 Ford Flex take?

Gasoline2014 Ford Flex / Fuel type
Use only UNLEADED gasoline or UNLEADED gasoline blended with a maximum of 85% ethanol (E-85) in your Flex Fuel Vehicle (FFV).

What type of oil does a 2014 Ford Flex use?

Oil Grade: SEO18

Viscosity:	All TEMPS….5W-20
Capacity:	With filter 6 quarts. After refill check oil level.
Torque:	Oil Drain Plug…20 ft/lbs