AHG Auto Service » Make » Acura » What is TPMS system Acura TSX?

What is TPMS system Acura TSX?

The TPMS system in an Acura TSX refers to the Tire Pressure Monitoring System. It is a safety feature that monitors the tire pressure in each wheel and alerts the driver if the pressure is too low. The system uses pressure sensors mounted in each wheel that send readings to a central electronic control unit. If the tire pressure drops below a certain threshold, the TPMS warning light will illuminate on the dashboard.
When the TPMS warning light comes on, it indicates a possible low tire pressure condition. This can happen due to cold weather conditions, which cause the tire pressure to drop. As the tire warms up under normal driving conditions, the light may turn off. However, if the TPMS light stays on, it is recommended to check the tire pressure (when the tires are cold) and inflate the tire to the proper pressure indicated on the door placard.
If the TPMS light continues to stay on even after inflating the tires to the correct pressure, it may indicate a problem with one or more of the TPMS sensors. The sensors could be missing or not functioning properly. In such cases, it is advisable to visit an Acura service and parts center for diagnosis and repair .
It is worth noting that the TPMS sensors have batteries that typically last around 5 years. If the batteries are depleted, the sensors may need to be replaced.
Please note that the information provided is based on the search results and may not cover all possible scenarios or specific details about the TPMS system in the Acura TSX. For more accurate and detailed information, it is recommended to consult the owner’s manual or contact an authorized Acura dealership.

What is the TPMS system error on Acura?

If you notice your vehicle’s tire pressure monitoring system (TMPS) icon has illuminated, it means that one or more of your tires may be at least 25% under the recommended PSI. Use caution with the TPMS light on— if rapid deflation is occurring it may result in a blowout.

What does check TPMS system mean on Acura TSX?

Any time that the TPMS warning light comes ON, there is a possible low tire pressure condition. Tire pressure can drop due to cold conditions, and this drop in pressure may cause the TPMS light to come ON. As the tire warms up under normal driving conditions, the light may turn OFF.

Where is the TPMS reset button on the Acura TSX?

Now hold down the “TPMS Reset” button until the flashing tire pressure light blinks three times. Start the engine and wait 20 minutes. Check your owner’s manual if you have trouble finding the reset button. You’ll usually find it beneath the steering wheel.

Is it OK to drive with TPMS light on?

As we mentioned earlier, a tire pressure light is a warning, not a command, so you don’t need to pull over immediately if you see it come on. However, driving on underinflated tires can be dangerous and can cause a variety of problems, including poor handling, reduced fuel efficiency, and increased tire wear.

What is the TPMS system on my Acura?

The TPMS meaning is “Tire Pressure Monitoring System” and uses tire pressure sensors to track the air pressure of your tire. If the system detects one or more of your vehicle’s tires are under-inflated, the light will appear — some TPMS lights flash.

Is it OK to drive with TPMS?

You will not be able to see this damage, which can increase over time. This is why you should maintain proper inflation pressure and try to avoid driving when the TPMS light is on. If you absolutely must drive a short distance on a tire with severely low pressure, drive very slowly and use extreme caution.

How do I reset my Acura TPMS?

Take your Acura out for a good drive at or above 50 mph, and make sure that you drive for at least 10 minutes. This should reset your sensor. If this doesn’t work, inflate each tire 3 PSI over the recommended amount, and then completely deflate each tire. Inflate each again to the recommended tire pressure.

Can I reset my TPMS myself?

Hold the TPMS reset button until the tire pressure light blinks three times, then release it. Start the car and wait about 20 minutes for the sensor to refresh. You will find the tire pressure monitor reset button under the steering wheel. Refer to your vehicle’s owner’s manual if you can’t find it.

How do I fix my TPMS sensor error?

With the vehicle off, turn the key to the “On” position, but do not start the car. Hold the TPMS reset button until the tire pressure light blinks three times, then release it. Start the car and wait about 20 minutes for the sensor to refresh.

Can you drive with TPMS warning?

You will not be able to see this damage, which can increase over time. This is why you should maintain proper inflation pressure and try to avoid driving when the TPMS light is on.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment