AHG Auto Service » Make » Ford » What is the width of the rear end of a Ford Falcon?

What is the width of the rear end of a Ford Falcon?

Rear End Width of Ford Falcon
The rear end width of a Ford Falcon can vary depending on the model and year. However, for the 1964 and 1965 Falcon V8, the rear end width is approximately 58 inches.
This measurement is specific to the 1964 and 1965 Falcon V8 models and may differ for other model years or variations of the Ford Falcon.

What is the width of a 9 inch ford rear end?

Common Ford 9″ Axle Widths

  • 65-66 Mustang = 57.25 inches.
  • 67-70 Mustang = 59.25 inches.
  • 71-73 Mustang = 61.25 inches.
  • 77-81 Versailles = 58.50 inches.
  • 67-73 Mustang, Torino, Ranchero, Fairlane = 59.25 inches to 61.25 inches.
  • 57-59 Ranchero and Wagon = 57.25 inches (narrowest 9″ housing)

What is the width of the axles on a ford Falcon?

56.5″
The standard width is 56.5″ Axle Flange to Axle Flange but custom widths are available for mini-tubbed cars.

What is the offset on Ford 9-inch rear end?

The tried-and-true Ford 9-inch is offset 15/16-inch, Ford’s 8.8-inch housing is offset 9/16-inch from the factory, and GM 10- and 12-bolts rears are offset 1/2-inch, for example.

How wide is a 1965 ford Falcon rear end?

The 1964 & 65 Falcon and Comets V8’s had a 58 inch wide 8 inch axle. The match from that is the 1977 to 1981 Granada / Monarch had both the 8 and 9 inch axles or the Lincoln Versailles 9 inch rear end the bonus is that they also have Disk Brakes.

How wide is a 1964 ford Falcon rear end?

Here it is again,64/65 Comet/Falcon 8″ rearend is 58 inches wide!

How wide is a 1963 Falcon rear end?

A stock 63 falcon V8 is 56 inches, the narrowest 8″ ford made. Approximate rear end widths measured from backing plate to backing plate.

What is the width of the rear end of a 1962 ford Falcon?

The 1963 Falcon and Comets Rear Axles as well as the 1960, 1961, 1962 7 1/4 Axels are suppose to be 55.8 Inch Wide.

What’s so great about a Ford 9-inch rear end?

The iconic Ford 9-inch has been the go-to diff for hot-rodders since day one. The brilliance of the unit is its ability to hold power, its quickness in changing gears, its vast range of available gear ratios, and the ease in which it can be setup. Shop our Ford 9-inch differential products here.

How wide is a 1964 Falcon rear end?

Re: 64 rear end width
Here it is again,64/65 Comet/Falcon 8″ rearend is 58 inches wide! You will need to narrow an 8.8 to fit,most people remove the long axle tube and axle and replace it with a second narrow side tube and axle!

How wide is the rear axle on a 1960 Ford Falcon?

The 1963 Falcon and Comets Rear Axles as well as the 1960, 1961, 1962 7 1/4 Axels are suppose to be 55.8 Inch Wide.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment