What is the width of the Ford 9 housing?

The Width of the Ford 9 Housing
The width of the Ford 9 housing can vary depending on the specific model and configuration. However, I found some information that can help you determine the width of the Ford 9 housing.
According to a post on The H.A.M.B. forum, the width of the Ford 9 housing can be around 61.5 inches from outside axle flange to outside axle flange. Another source mentions that the overall length of the rear axle, from outside-of-bearing-end to outside-of-bearing-end, can be measured and recorded to determine the width.
It’s important to note that the Ford 9 housing was produced from 1957 through 1986, and there may be variations in width depending on the specific year and model. Additionally, different applications may have one axle longer than the other due to an offset center section.
I hope this information helps you determine the width of the Ford 9 housing you are interested in. Let me know if there’s anything else I can assist you with!

What is the width of the Ford 9 axle housing?

The 9” rear axle was manufactured in seven different housing widths, from 57-1/4” to 69-1/4” wide, any of which may be ideal for a particular chassis. Determine housing width by measuring the distance between the axle flanges located on the outward end of each axle tube.

How do you identify a Ford 9 inch housing?

When attempting to identify Ford 9 inch rear end specs, several indicators will help you. First, the Ford 9” has a third member bolted to the front of the axle housing and there is not a traditional rear housing cover as is found with many other rear ends. Ford 9” housings were also produced from 1957 through 1986.

How wide is a stock Ford 9-inch rear end?

These axles are 65 inches wide from wheel mounting surface to wheel mounting surface (a 68-inch-wide E-series van version is also common), feature the legendary 9-inch diameter ring gear, large Timken set 20 axle bearings, semi-floating 28- or 31-spline axleshafts, drum brakes, and a 5-on-5.5 lug pattern.

How wide is a Ford 9 inch spring perch?

Spring Perches are not a one size fits all item. These perches are specially made for Dana 60, Ford 8.8 & Ford 9″ applications they are cut for a 3″ to 3 1/4″ axle tube and are bent for a 2 1/2″ wide spring.

How wide is a stock Ford 9 inch rear end?

These axles are 65 inches wide from wheel mounting surface to wheel mounting surface (a 68-inch-wide E-series van version is also common), feature the legendary 9-inch diameter ring gear, large Timken set 20 axle bearings, semi-floating 28- or 31-spline axleshafts, drum brakes, and a 5-on-5.5 lug pattern.

How wide is a Dana 44?

TheseDana 44s are an almost perfect swap for the rear of any TJ, YJ, XJ, ZJ, WJ, or even a KJ. At 60 3/4 inches wide, this axle is almost the same width as a TJ (61 1/2 inches, wheel-mounting surface to wheel-mounting surface).

Why is a Ford 9-inch called a 9-inch?

The Ford 9-inch rear end, so named because of its 9-inch ring gear diameter, was manufactured from 1957 to 1987 by the Ford Motor Company and installed in some intermediate and most full-size Ford, Lincoln, and Mercury passenger cars, F-Series ½-ton trucks, and Econoline vans.

Why is the Ford 9-inch so strong?

The Ford nine-inch, introduced in 1957, incorporated all that smart thinking but had distinct advantages. First, there’s the diameter of its ring gear at—you guessed it—nine inches. That’s larger and thus stronger than most contemporaries. Ford engineers increased the angle of the pinion’s teeth, as well.

How do you measure the width of a Ford 9?

Total width-this is the total width of the assembled rear end measured from the outside of one axle flange to the outside of the other. Backing plate to backing plate means nothing when measuring for a rear end so forget about that way of measuring.

What is so special about a Ford 9 inch rear end?

One of the features which distinguishes this axle from other high-performance or heavy-duty domestic solid axles is that unlike other axle designs, access to the differential gears is not through the rear center cover; rather, in the Ford 9 inch, the rear cover is welded to the axle housing, and access to internals is …