Ford Escort Mk2 Rear Axle Width
The width of the Ford Escort Mk2 rear axle is 61.73 inches according to the technical and mechanical specifications of the 1980 Ford Escort MKII.
Contents
- How do you measure rear axle width?
- How do you measure the width of a rear axle?
- What is the width of the rear axle on the Mk2 Escort?
- How do I choose an axle width?
- What size is a rear axle?
- What is the width of the English axle?
- Where do you measure axle width?
- How are rear axles measured?
- What is the width of a Mk2 Escort?
- Where do I find my axle size?
How do you measure rear axle width?
Place. All right so we’re going to do that on both sides. And then the whole goal is now that we can measure from one side to the other we’re going to use a tape measure.
How do you measure the width of a rear axle?
Below. If you like this video. Subscribe here for more curry Tech videos. Click right here and for other Curry.
What is the width of the rear axle on the Mk2 Escort?
— 48.5″ wide casing.
How do I choose an axle width?
In general, we would recommend choosing a truck with an axle width that’s exactly the same width as your deck. A margin of +/- 0.125″ is totally okay. So, for a deck that is 8″ wide trucks an axle width from 7.875″ – 8.125″ are ideal.
What size is a rear axle?
Axle diameters of 15 millimetres at the front and 12 millimetres at the rear have become the established standards. On older bikes with a lot of suspension travel, 20-millimetre axles were sometimes installed at the front. Today, two axle diameters dominate the market, whether boost or non-Boost.
What is the width of the English axle?
Plenty of widths of English axles exist-from the narrowest (the 105E’s) at 48 inches.
Where do you measure axle width?
This is one of the most important measurements you’ll need to make on your axle. Measure from the outside edge of one hub to the outside edge of the opposite hub on the other end of the axle.
How are rear axles measured?
Semi-float and C-clip-equipped axle shafts are measured from the end of the shaft to the outer edge of the mounting flange. Full-float designs are measured from the spline ends to the front surface of the mounting flange. Check out the accompanying schematics for more on how to measure each axle type.
What is the width of a Mk2 Escort?
Second generation (1974–1980)
| Second generation | |
|---|---|
| Wheelbase | 94.5 in (2,400 mm) |
| Length | 156.5 in (3,975 mm) (saloon) 163 in (4,140 mm) (estate) |
| Width | 61.8 in (1,570 mm) |
| Height | 55.65 in (1,414 mm) |
Where do I find my axle size?
Usually this is located on the driver’s side of the trailer. Another way we can determine which axle we need is by measuring the diameter of the axle.
