What is the vt4 light on a Honda Pilot?

About the VTM-4 Light on a Honda Pilot
The VTM-4 light on a Honda Pilot indicates the status of the Variable Torque Management 4-Wheel-Drive System (VTM-4). This system controls the level of torque to the rear wheels of the car in situations where additional traction is needed, such as driving on difficult terrain [[3]].
Meaning of the VTM-4 Light
When the VTM-4 light is on, it indicates that the VTM-4 system is active, allowing the Honda Pilot to drive across difficult terrain. It could also indicate an issue with the VTM-4 system, but in many cases, this light doesn’t indicate that anything is wrong other than the system is activated.
Reasons for the VTM-4 Light Coming On
The VTM-4 light may come on due to various reasons, including issues with the vehicle’s four-wheel-drive system components, electrical faults, or specific error codes such as P1399, P0450, and P0301. Additionally, low engine oil levels can also trigger the VTM-4 light to illuminate.
In summary, the VTM-4 light on a Honda Pilot is related to the Variable Torque Management 4-Wheel-Drive System, indicating its activation or potential issues with the system or the vehicle’s components. If the light is on, it’s advisable to have the vehicle checked to determine the specific cause and take appropriate action.

How do I turn off VTM-4?

Can I Turn the System off?

1. Press the “VTM-4 Lock” button so that the light turns off.
2. Move the shift lever to “D” or drive.
3. Turn the ignition switch to the “lock” or “0” position.

What causes the Honda Pilot check engine light VTM-4 to come on?

The VTM-4 light is on because of the CEL light being on. Take it to Autozone or similar and ask them to scan for codes if you don’t have one yourself. Once you address the codes the lights will go off. You can drive until your light starts to flash.

What does VTM-4 code mean?

The Variable Torque Management 4WD System (VTM-4) automatically transfers varying amounts of engine torque to the rear wheels under lower traction conditions. If more traction is needed when your MDX is stuck, or is likely to become stuck, you can use the VTM-4 Lock button to increase torque to the rear wheels.

Why is my Honda Pilot check engine light on?

The check engine light warns of issues ranging from a gas cap that’s not properly tightened to a more serious failure like a bad catalytic converter or a problem with one of the car’s oxygen sensors, so it good to get the correct code reading and diagnosis.

Why does VTM-4 light came on?

System. But there’s some kind of problem with the engine. And so the computer’s shutting the system off. If you also happen to be getting a VSA light which stands for vehicle. Stability. Assist.

What does the VTM-4 button do?

Um all you have to do is press the vtm4. Again and then you can put the vehicle back into normal drive.

What is VTM-4 fluid?

What is it? Part of the Variable Torque Management® 4WD System (VTM-4®), the rear differential automatically varies the amount of torque distributed to each rear wheel based on demand. Rear differential fluid lubricates and cools the clutch packs inside the rear differential.

What does it mean when the Check Engine Light and VTM-4 light comes on?

This is the Variable Torque Management 4 wheel drive system. It is the component of Your vehicle that moves the amounts or levels or torque to the rear wheels of the vehicle when additional traction is needed. The most common cause of this light showing up is due to low oil in the engine, or a loosened or blown gasket.

Can I drive my Honda Pilot with the VTM-4 light on?

In this case, a flashing Honda Pilot VTM-4 light indicates a serious problem in the rear differential, and driving on is likely to cause further damage.

Why did my VTM-4 light come on?

System for example if you scan the onboard. Computer you got a p0442. Then there’s a problem in the EVAP system. And the computer’s seeing that there’s a leak.