AHG Auto Service » Make » Ford » What is the TYRE pressure for a Ford Aspire?

What is the TYRE pressure for a Ford Aspire?

The recommended tyre pressure for a Ford Aspire is 32 PSI for the front tyres and 35 PSI for the rear tyres. It is important to note that 1 or 2 units above or below these recommended values can also be accepted depending on the terrain you are driving on.

What is the correct PSI for my tyres?

between 28 and 36 PSI
Each vehicle has its own specifications for tyre pressure, but most fall between 28 and 36 PSI (pounds per square inch) however this could be greater especially if you carry extra load in your vehicle or run on larger diameter wheels (there is usually another pressure recommendation for these or the placard).

Is 37 tire pressure OK?

Never use the MAX pressure stated on the tire itself. You will always want to stick close to the recommended tire PSI stated on the information sticker found on the door frame of your vehicle. If the recommended tire PSI is indeed 35 pushing to 37 is absolutely fine.

What is the tire pressure for a Ford Aspire?

Recommended front and rear tyre pressure for this is 32 PSI and 35 PSI respectively. 1 or 2 units above and below this mark can also be accepted depending on the terrain you are taking the vehicle.

Is 32 a bad tire pressure?

Ideal Tire Pressure
Tire pressure between 32 to 35 PSI is most suitable for most vehicles. However, one can go as low as 20 PSI (although that is not recommended). Anything below 20 PSI is considered a flat tire. PSI stands for Pounds per Square Inch.

Is 40 PSI good tire pressure?

In conclusion, tire pressure is an important factor in keeping your vehicle safe and performing optimally. The recommended tire pressure for most vehicles is between 30-35 PSI (pounds per square inch). A tire with a higher PSI rating such as 40 can have both benefits and risks depending on the driving conditions.

What PSI level should tyres be?

between 28 and 36 PSI
Running your tires at the correct pressure is important because it keeps you safe, cuts down your gas bill, and makes your tires last longer. Each vehicle has its own specifications for tire pressure, but most fall between 28 and 36 PSI (pounds per square inch).

Is 40 PSI too high for tires?

For instance, if 35 psi is recommended, and the maximum safe pressure listed on your sidewall is 44 psi, you can safely put 38 or 40 psi in your tires. You can even go to 44 psi. You’ll experience a harder ride, but you won’t create a blowout danger. You may even experience sharper cornering and increased fuel economy.

What should Ford tyre pressure be?

Ford Focus tyre pressure by year of manufacture

Year Front Tyre Size Front Pressure
2005-2010 205/55/R16 V 91 33 PSI / 2.3 BAR
2011-2015 215/55/R16 H 93 30 PSI / 2.1 BAR
2016-2020 205/55/R16 V 91 30 PSI / 2.1 BAR
2021-2023 215/50/R17 V 91 33 PSI / 2.3 BAR

Is my tire pressure too low?

Here are a few of the most common signs: Vehicle is making a flapping sound while driving. The vehicle feels weird when turning. The vehicle takes longer to stop than usual.

What happens if my TYRE pressure is too high?

Dangers of over-inflated tyres
This creates a loss of traction and uneven wear. Over-inflated tyres can affect handling (especially when cornering at speed), braking, tyre noise and ride comfort. A stiff, over-inflated tyre on a wet, slippery road is also dangerous due to the braking ability being severely reduced.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment