About the Traction Control Light on a Subaru Legacy
The traction control light in a Subaru Legacy serves as an indicator of the status of the vehicle’s traction control system. When the traction control system is not functioning properly, this light will illuminate on the dashboard cluster, typically taking the form of the acronym TC or sometimes appearing as a small illuminated picture of a car losing control.
Function of Traction Control in a Subaru Legacy
The traction control system in a Subaru Legacy is designed to provide driving aid during adverse conditions, such as rain, snow, ice, or poorly maintained roads. It is automatically “ON” every time the vehicle is started, and it is particularly beneficial in adverse weather conditions. However, there are instances where it may be necessary to turn the traction control off, such as when driving through deep snow or other specific situations.
Implications of the Traction Control Light Being On
When the traction control light is illuminated, it indicates that the traction control system is not working properly. While the car is unlikely to incur further damage from a faulty traction control system, it may not be safe to drive in adverse weather conditions, and the issue causing the light to illuminate could also impact the ABS (anti-lock braking system).
Troubleshooting the Traction Control Light
If the traction control light stays on all the time, it may indicate a fault in the system. Troubleshooting steps or common faults that cause the lamp to stay on can be addressed by a qualified mechanic or service center.
In summary, the traction control light in a Subaru Legacy serves as an important indicator of the status of the vehicle’s traction control system. When illuminated, it signifies that the system is not functioning properly, potentially impacting the vehicle’s safety in adverse weather conditions. If the light remains on consistently, it may indicate a fault that requires attention from a qualified mechanic or service center.
If you have any further questions or need additional information, feel free to ask!
Contents
- Why did my traction control and check engine light come on Subaru?
- How do you reset the traction control light on a Subaru Legacy?
- What causes traction control light to come on?
- Is it OK to drive with traction control light on?
- How do I fix the traction control warning light?
- Why did my traction control and check engine light come on after?
- Can worn brake pads cause traction control light to come on?
- How do you fix the traction control light?
- Why wont my traction light go off?
- How much does it cost to fix traction control?
Why did my traction control and check engine light come on Subaru?
It could be a faulty sensor, wiring issue, module fault, engine malfunction, etc. To see what specifically is causing the light to come on the vehicle will need to be tested with a scan tool that connects to the vehicle. This test will provide a trouble code that describes what specific system is having the problem.
How do you reset the traction control light on a Subaru Legacy?
Turn Traction Control On and Off
In such cases, turning traction control on and off may be enough to solve the problem. If your Subaru model has a separate VSC button, you can also try to re-engage the system by holding the button down.
What causes traction control light to come on?
And the attraction control one light starts to start to flash. Let’s just say you are driving. And you got out of that situation.
Is it OK to drive with traction control light on?
While your car is typically safe to drive with the traction control light on, you should not drive it under certain conditions. If the traction control light, anti-lock braking system light, and red brake-warning light illuminate, your entire braking system may be affected.
How do I fix the traction control warning light?
Press the gas pedal 3 times in quick succession. Then, turn your engine on all the way and let it run for a minute. The TCS and ABS lights should reset and go away if there isn’t any underlying problem with your traction control system.
Why did my traction control and check engine light come on after?
Faulty wheel speed sensors or even low tire pressure can all cause the check engine light to come on with the traction control light.
Can worn brake pads cause traction control light to come on?
Another common cause of the electronic stability control light is a malfunction in the anti-lock brake system. This can be caused by various things, such as low brake fluid, worn-out brake pads, or a problem with the sensor.
How do you fix the traction control light?
Press the gas pedal 3 times in quick succession. Then, turn your engine on all the way and let it run for a minute. The TCS and ABS lights should reset and go away if there isn’t any underlying problem with your traction control system.
Why wont my traction light go off?
If the traction control light won’t turn off, there can be some reasons. One reason could be that the fuse for the traction control system has blown. Or it could be that there is a problem with the traction control sensors causing the light to stay on.
How much does it cost to fix traction control?
The average cost for a Traction Control Switch Replacement is between $101 and $111. Labor costs are estimated between $39 and $49 while parts are typically priced around $62. This range does not include taxes and fees, and does not factor in your unique location. Related repairs may also be needed.
