What is the TPMS warning on my Acura?

TPMS Warning on Acura
The TPMS warning on your Acura refers to the Tire Pressure Monitoring System. This system is designed to monitor the air pressure in your tires and alert you if the pressure drops below a certain threshold. Maintaining proper tire pressure is important for the safety and performance of your vehicle.
If the TPMS warning light is illuminated on your Acura’s dashboard, it indicates that there may be an issue with the tire pressure in one or more of your tires. It’s important to address this issue promptly to ensure your safety on the road.
Here are some key points to keep in mind regarding the TPMS warning on your Acura:
1. Purpose of TPMS: The TPMS is a safety feature that helps you monitor the tire pressure in your vehicle.
2. Types of TPMS: There are two main types of TPMS systems used in Acura vehicles: direct and indirect systems. Direct systems use sensors mounted in each tire to wirelessly send tire pressure information to the vehicle’s computer. Indirect systems estimate tire pressure through wheel speed sensors that measure the rotational speed of each tire.
3. TPMS Threshold: The TPMS warning light is typically triggered when a tire loses more than 25% of the recommended tire pressure.
4. Importance of Proper Tire Pressure: Maintaining proper tire pressure is crucial for your vehicle’s safety and performance. Underinflated tires can negatively impact fuel economy and increase the risk of tire failure.
5. Resetting TPMS: If the TPMS warning light is still on after checking and adjusting the tire pressure, you can try resetting the system. The process may vary depending on the model and year of your Acura. It is recommended to consult the owner’s manual or visit an Acura service center for assistance.
Remember, if you are unsure about any aspect of the TPMS warning on your Acura or need further assistance, it is always best to consult with a qualified Acura service professional.
I hope this information helps! Let me know if you have any other questions.

How do I reset my Acura TPMS sensor?

Take your Acura out for a good drive at or above 50 mph, and make sure that you drive for at least 10 minutes. This should reset your sensor. If this doesn’t work, inflate each tire 3 PSI over the recommended amount, and then completely deflate each tire. Inflate each again to the recommended tire pressure.

How do I get rid of TPMS warning?

Set the parking brake. Look for a button to the left of the steering column labeled with the TPMS icon if it’s there push and hold it until the TPMS indicator in the instrument panel blinks twice.

Why is my TPMS light on but tires are fine?

The causes can be a malfunction, or the weather changes. Other reasons why your TPMS light may still be blinking is because your tire may be damaged, or you might have gotten a recent tire replacement. Overall, the reasons can be vast, which is why it is best to take your car to a technician for professional diagnosis.

How can you tell which TPMS sensor is bad?

The only way to be 100 percent sure which sensor is the culprit would be to use a scanner to scan the tpms module, there should be a code set indicating which sensor is bad. On a side note, 30 psi sounds a little too low for a tire pressure sensor to me, but I could be wrong.

How much does it cost to fix a TPMS sensor?

On average, replacing a TPMS sensor can range from $50 to $200 per tire, with the average cost being around $100 to $150 per tire. However, the cost can be much higher, mainly if the vehicle requires specialized sensors or if you get the replacement done at a dealership.

What triggers a TPMS sensor?

When a tire’s pressure drops below the recommended threshold, the TPMS sensors transmit a signal to the vehicle’s computer, which then triggers a low tire pressure warning. This alert allows drivers to address the issue promptly and maintain proper tire inflation (32 psi to 35 psi when they’re cold).

What is the TPMS sensor on my Acura?

These sensors are attached to the inside of the valve stems on each tire, allowing individual tire pressures to appear on the information display to quickly identify which tire is affected should the pressure drop below the recommendation.

Where is the Acura TPMS reset button?

Additionally, you can also utilize the TPMS reset button located under your steering wheel. Reference your owner’s manual to find its exact placement. With the vehicle off, turn the key to “on.” Now, press and hold the reset button until it blinks three times.

Is it OK to drive with TPMS light on?

As we mentioned earlier, a tire pressure light is a warning, not a command, so you don’t need to pull over immediately if you see it come on. However, driving on underinflated tires can be dangerous and can cause a variety of problems, including poor handling, reduced fuel efficiency, and increased tire wear.

What is the TPMS system malfunction on Acura?

When the malfunction indicator is illuminated, the system may not be able to detect or signal low tire pressure as intended. TPMS malfunctions may occur for a variety of reasons, including the installation of replacement or alternate tires or wheels on the vehicle that prevent the TPMS from functioning properly.