About the TPMS System on an Acura TL
The Tire Pressure Monitoring System (TPMS) on an Acura TL is a crucial safety feature that monitors the tire pressure and alerts the driver if it detects low tire pressure. The system uses pressure sensors mounted in each wheel that send readings to a central electronic control unit. If the tire pressure drops due to cold conditions, the TPMS warning light may come on. However, as the tire warms up under normal driving conditions, the light may turn off. If the cold weather conditions cause the TPMS light to stay on, it is recommended to check the tire pressure when the tires are cold and inflate the tire to the proper pressure indicated on the door placard.
Resetting the TPMS Light
If the TPMS light remains on, there are several troubleshooting tips that can be tried. For older Acura cars with turn-key ignitions, driving on a highway at or above 50 mph for 10 minutes may reset the sensor for the tire light. Additionally, operating the car for 20 minutes can also reset the system. The TPMS reset button, for vehicles without a central display, can often be found on the left or under the steering wheel. It’s important to consult the Acura owner’s manual for assistance in locating the TPMS reset button .
TPMS Sensor
The TPMS sensor, also known as the Tire Pressure Monitoring System TPMS Sensor, is an essential component of the system. It measures the pressure and temperature in the tire and transmits this data along with the unique ID of the TPMS to the tire pressure monitor ECU/receiver.
Conclusion
The TPMS system on an Acura TL is designed to ensure that the driver is promptly alerted to any potential low tire pressure conditions, thereby enhancing safety and handling. If you have further questions or need assistance with your TPMS, it’s recommended to contact the Acura service department for expert advice and support.
Contents
- What does check TPMS on Acura mean?
- Is it OK to drive with bad TPMS sensor?
- What is my TPMS system?
- What is the TPMS system malfunction on Acura?
- How do you reset the TPMS on a Acura TL?
- How do I clear the TPMS warning?
- Is it OK to drive with TPMS light on?
- Can I reset my TPMS myself?
- Where is the Acura TPMS reset button?
- How do you fix a TPMS system?
What does check TPMS on Acura mean?
Any time that the TPMS warning light comes ON, there is a possible low tire pressure condition. Tire pressure can drop due to cold conditions, and this drop in pressure may cause the TPMS light to come ON. As the tire warms up under normal driving conditions, the light may turn OFF.
Is it OK to drive with bad TPMS sensor?
Motorists should not drive with a faulty TPMS sensor as it may become a serious safety concern.
What is my TPMS system?
The purpose of the TPMS (Tire Pressure Monitoring System) is to alert you when tire pressure is too low and could create unsafe driving conditions. If the light is illuminated, it means your tires could be underinflated, which can lead to undue tire wear and possible tire failure.
What is the TPMS system malfunction on Acura?
When the malfunction indicator is illuminated, the system may not be able to detect or signal low tire pressure as intended. TPMS malfunctions may occur for a variety of reasons, including the installation of replacement or alternate tires or wheels on the vehicle that prevent the TPMS from functioning properly.
How do you reset the TPMS on a Acura TL?
Turn the key to “On” (one position to the right), but don’t start the car. Now hold down the “TPMS Reset” button until the flashing tire pressure light blinks three times. Start the engine and wait 20 minutes. Check your owner’s manual if you have trouble finding the reset button.
How do I clear the TPMS warning?
On press the home button on the touch. Screen then touch vehicle settings touch tpms calibration then select calibrate if calibration failed to start appears repeat the previous. Step the calibration.
Is it OK to drive with TPMS light on?
As we mentioned earlier, a tire pressure light is a warning, not a command, so you don’t need to pull over immediately if you see it come on. However, driving on underinflated tires can be dangerous and can cause a variety of problems, including poor handling, reduced fuel efficiency, and increased tire wear.
Can I reset my TPMS myself?
Hold the TPMS reset button until the tire pressure light blinks three times, then release it. Start the car and wait about 20 minutes for the sensor to refresh. You will find the tire pressure monitor reset button under the steering wheel. Refer to your vehicle’s owner’s manual if you can’t find it.
Additionally, you can also utilize the TPMS reset button located under your steering wheel. Reference your owner’s manual to find its exact placement. With the vehicle off, turn the key to “on.” Now, press and hold the reset button until it blinks three times.
How do you fix a TPMS system?
Hold the TPMS reset button until the tire pressure light blinks three times, then release it. Start the car and wait about 20 minutes for the sensor to refresh. You will find the tire pressure monitor reset button under the steering wheel. Refer to your vehicle’s owner’s manual if you can’t find it.