The TPMS (Tire Pressure Monitoring System) in an Acura TL is a safety feature that monitors the tire pressure in each tire. It uses pressure sensors mounted in each wheel to send readings to a central electronic control unit. The system evaluates whether the tire pressure is at the recommended level and alerts the driver if there is a low tire pressure condition. The TPMS warning light will illuminate on the dashboard if there is a possible low tire pressure condition. Cold weather conditions can cause a drop in tire pressure, triggering the TPMS light. As the tire warms up under normal driving conditions, the light may turn off. If the TPMS light stays on, it is recommended to check the tire pressure (when tires are cold) and inflate the tire to the proper pressure indicated on the door placard.
Please note that the TPMS system in Acura TL models may vary depending on the year and specific model. It is always best to consult the Acura owner’s manual or contact an Acura service center for specific instructions on how to reset or troubleshoot the TPMS system [[4]].
Let me know if there’s anything else I can help with!
Contents
- How do you turn off the TPMS light on a Acura TL?
- Is it OK to drive with TPMS light on?
- How do I get rid of TPMS warning?
- What does check TPMS on Acura mean?
- What is my TPMS system?
- Is it OK to drive with bad TPMS sensor?
- What is the TPMS system malfunction on Acura?
- Where is the Acura TPMS reset button?
- Where is the TPMS system located?
- How do you fix a TPMS system?
How do you turn off the TPMS light on a Acura TL?
Turn the key to “On” (one position to the right), but don’t start the car. Now hold down the “TPMS Reset” button until the flashing tire pressure light blinks three times. Start the engine and wait 20 minutes. Check your owner’s manual if you have trouble finding the reset button.
Is it OK to drive with TPMS light on?
As we mentioned earlier, a tire pressure light is a warning, not a command, so you don’t need to pull over immediately if you see it come on. However, driving on underinflated tires can be dangerous and can cause a variety of problems, including poor handling, reduced fuel efficiency, and increased tire wear.
How do I get rid of TPMS warning?
Set the parking brake. Look for a button to the left of the steering column labeled with the TPMS icon if it’s there push and hold it until the TPMS indicator in the instrument panel blinks twice.
What does check TPMS on Acura mean?
Any time that the TPMS warning light comes ON, there is a possible low tire pressure condition. Tire pressure can drop due to cold conditions, and this drop in pressure may cause the TPMS light to come ON. As the tire warms up under normal driving conditions, the light may turn OFF.
What is my TPMS system?
The purpose of the TPMS (Tire Pressure Monitoring System) is to alert you when tire pressure is too low and could create unsafe driving conditions. If the light is illuminated, it means your tires could be underinflated, which can lead to undue tire wear and possible tire failure.
Is it OK to drive with bad TPMS sensor?
Motorists should not drive with a faulty TPMS sensor as it may become a serious safety concern.
What is the TPMS system malfunction on Acura?
When the malfunction indicator is illuminated, the system may not be able to detect or signal low tire pressure as intended. TPMS malfunctions may occur for a variety of reasons, including the installation of replacement or alternate tires or wheels on the vehicle that prevent the TPMS from functioning properly.
Additionally, you can also utilize the TPMS reset button located under your steering wheel. Reference your owner’s manual to find its exact placement. With the vehicle off, turn the key to “on.” Now, press and hold the reset button until it blinks three times.
Where is the TPMS system located?
The tire pressure sensor is typically found within the tire itself, mounted on the wheel assembly. These sensors relay crucial information to the vehicle’s computer, triggering the tire pressure sensor light when a discrepancy is detected.
How do you fix a TPMS system?
Hold the TPMS reset button until the tire pressure light blinks three times, then release it. Start the car and wait about 20 minutes for the sensor to refresh. You will find the tire pressure monitor reset button under the steering wheel. Refer to your vehicle’s owner’s manual if you can’t find it.