The TPMS sensor on your Acura is the Tire Pressure Monitoring System sensor. It is a device that monitors the air pressure in your vehicle’s tires and alerts you if the pressure drops below a certain threshold. The TPMS sensor is typically located inside each tire and communicates with the vehicle’s onboard computer system to provide real-time tire pressure information. This helps ensure that your tires are properly inflated, which is important for safety, fuel efficiency, and tire longevity.
Contents
- What causes a TPMS sensor to go bad?
- What is the TPMS system on my Acura?
- What is the TPMS system malfunction on Acura?
- Where is the Acura TPMS reset button?
- How do I fix my TPMS on my Acura?
- How much does it cost to fix TPMS malfunction?
- How much does it cost to replace a TPMS sensor?
- Is it OK to drive with TPMS light on?
- Can I reset my TPMS myself?
- Can I fix my own TPMS?
What causes a TPMS sensor to go bad?
The valve stems of some TPMS systems operate in salt, water and ferrous brake dust. These elements can damage a sensor over time. Galvanic corrosion can kill a sensor from the inside. If you use the wrong valve core or nut, it can cause a reaction between the two dissimilar metals.
What is the TPMS system on my Acura?
The TPMS meaning is “Tire Pressure Monitoring System” and uses tire pressure sensors to track the air pressure of your tire. If the system detects one or more of your vehicle’s tires are under-inflated, the light will appear — some TPMS lights flash.
What is the TPMS system malfunction on Acura?
When the malfunction indicator is illuminated, the system may not be able to detect or signal low tire pressure as intended. TPMS malfunctions may occur for a variety of reasons, including the installation of replacement or alternate tires or wheels on the vehicle that prevent the TPMS from functioning properly.
Additionally, you can also utilize the TPMS reset button located under your steering wheel. Reference your owner’s manual to find its exact placement. With the vehicle off, turn the key to “on.” Now, press and hold the reset button until it blinks three times.
How do I fix my TPMS on my Acura?
Turn the key to “On” (one position to the right), but don’t start the car. Now hold down the “TPMS Reset” button until the flashing tire pressure light blinks three times. Start the engine and wait 20 minutes. Check your owner’s manual if you have trouble finding the reset button.
How much does it cost to fix TPMS malfunction?
Summary. The cost of replacing a TPMS (Tire Pressure Monitoring System) sensor can vary greatly depending on the type of vehicle, brand and type of sensor, location of replacement, and labor cost. The average cost can range from $50 to $200 per tire, with the average cost being around $100 to $150 per tire.
How much does it cost to replace a TPMS sensor?
between $314 and $368
The average cost to replace the TPMS Sensor is between $314 and $368. Find out TPMS Sensor replacement pricing for your vehicle.
Is it OK to drive with TPMS light on?
As we mentioned earlier, a tire pressure light is a warning, not a command, so you don’t need to pull over immediately if you see it come on. However, driving on underinflated tires can be dangerous and can cause a variety of problems, including poor handling, reduced fuel efficiency, and increased tire wear.
Can I reset my TPMS myself?
Hold the TPMS reset button until the tire pressure light blinks three times, then release it. Start the car and wait about 20 minutes for the sensor to refresh. You will find the tire pressure monitor reset button under the steering wheel. Refer to your vehicle’s owner’s manual if you can’t find it.
Can I fix my own TPMS?
For handy individuals with some mechanical experience, replacing TPMS sensors can be a DIY project. This option can be cost-effective but requires a certain skill level and the right tools.
