The TPMS (Tire Pressure Monitoring System) on your Acura RDX is a critical safety feature that monitors the tire pressure and alerts you if there is a problem with the tire pressure. It is important to ensure that the TPMS is activated so that you can be notified when there is a need to fix the tire pressure.
If you see that the TPMS light is still on, you can try a few troubleshooting tips. One method is to take a drive on a highway at or above 50 mph for 10 minutes to reset the sensor for your tire light. This can cause the sensor to reset the next time you turn on the car. Another method, specifically for older Acura cars with turn-key ignitions, is to turn the key to the “on” position without starting the engine, and then press and hold the TPMS reset button until the TPMS light blinks twice.
If these troubleshooting tips do not resolve the issue, it is recommended to visit an Acura service and parts center for further diagnosis and repair.
Please note that the information provided is based on the search results and may not cover all possible scenarios. It is always best to consult the owner’s manual or contact an authorized Acura service center for specific instructions and assistance with the TPMS on your Acura RDX.
Contents
- What is my TPMS on?
- Where is the TPMS reset button on Acura RDX?
- Why is my TPMS light on but tires are fine?
- What is the TPMS symbol on my dashboard?
- How do I clear my TPMS check?
- Is it OK to drive with TPMS light on?
- Is it OK to drive with bad TPMS sensor?
- What is the TPMS sensor on my Acura?
- Can I reset my TPMS myself?
- Where is the TPMS reset button?
What is my TPMS on?
The purpose of the TPMS (Tire Pressure Monitoring System) is to alert you when tire pressure is too low and could create unsafe driving conditions. If the light is illuminated, it means your tires could be underinflated, which can lead to undue tire wear and possible tire failure.
Additionally, you can also utilize the TPMS reset button located under your steering wheel. Reference your owner’s manual to find its exact placement. With the vehicle off, turn the key to “on.” Now, press and hold the reset button until it blinks three times.
Why is my TPMS light on but tires are fine?
The causes can be a malfunction, or the weather changes. Other reasons why your TPMS light may still be blinking is because your tire may be damaged, or you might have gotten a recent tire replacement. Overall, the reasons can be vast, which is why it is best to take your car to a technician for professional diagnosis.
What is the TPMS symbol on my dashboard?
What the TPMS light means and what you need to do. The tire pressure monitoring system (TPMS) light is a warning indicator on the dashboard that tells you when your tires are too low. The light is a picture of the cross section of a tire (shaped like a horseshoe) with an exclamation point inside it.
How do I clear my TPMS check?
On press the home button on the touch. Screen then touch vehicle settings touch tpms calibration then select calibrate if calibration failed to start appears repeat the previous. Step the calibration.
Is it OK to drive with TPMS light on?
As we mentioned earlier, a tire pressure light is a warning, not a command, so you don’t need to pull over immediately if you see it come on. However, driving on underinflated tires can be dangerous and can cause a variety of problems, including poor handling, reduced fuel efficiency, and increased tire wear.
Is it OK to drive with bad TPMS sensor?
Motorists should not drive with a faulty TPMS sensor as it may become a serious safety concern.
What is the TPMS sensor on my Acura?
These sensors are attached to the inside of the valve stems on each tire, allowing individual tire pressures to appear on the information display to quickly identify which tire is affected should the pressure drop below the recommendation.
Can I reset my TPMS myself?
Hold the TPMS reset button until the tire pressure light blinks three times, then release it. Start the car and wait about 20 minutes for the sensor to refresh. You will find the tire pressure monitor reset button under the steering wheel. Refer to your vehicle’s owner’s manual if you can’t find it.
Set the parking brake. Look for a button to the left of the steering column labeled with the TPMS icon if it’s there push and hold it until the TPMS indicator in the instrument panel blinks twice.
