About the TPMS on a Honda CR-V
The Tire Pressure Monitoring System (TPMS) in a Honda CR-V is designed to alert the driver when one or more tires fall below the recommended tire pressure. The system is equipped with sensors in each tire that communicate with the vehicle’s diagnostic computer. When the tire pressure falls out of a specified range, the sensor sends a signal to the computer, which then notifies the driver through the TPMS light on the dashboard .
TPMS Reset and Calibration
– When a tire pressure sensor or control unit is replaced on a 2007-2013 Honda CR-V, or a known-good wheel is substituted, the ID(s) of all four tire sensors must be memorized by the TPMS control unit. After memorizing the sensor ID(s) or doing a tire rotation, the mounting location of sensors 1, 2, 3, and 4 must be determined. Special tools such as the Honda diagnostic system (HDS) or an OBD-II compatible scan tool and an ATEQ VT55 tool are needed to program information into the new TPMS control unit with both of the reset procedures.
– The TPMS on a Honda CR-V requires recalibration after a tire is refilled or replaced, or when the tires are rotated. This can be done using the Display Audio touch-screen in the vehicle.
– Any time the tires are reinflated, changed, or rotated, the TPMS needs to be recalibrated before it will work properly again. The recalibration process takes about 30 minutes of driving between 30-65 miles per hour.
Common Issues
– The TPMS light may come on due to drastic changes in outside temperatures, which can cause the loss of tire pressure. In such cases, adding more air to the tires usually resolves the issue.
– If the TPMS light is on, it’s important to immediately check the tire pressure and verify that the tires have proper air pressure before driving the vehicle.
In summary, the TPMS on a Honda CR-V is a vital safety feature that helps drivers monitor tire pressure and ensure safe driving conditions. If you have any concerns about the TPMS in your Honda CR-V, it’s recommended to consult with a qualified technician for proper diagnosis and resolution of any issues.
Contents
- Where is TPMS reset button?
- Why is my TPMS light on but tires are fine?
- How do I clear my TPMS light?
- How do I tell which tire pressure sensor is bad?
- What does it mean when my Honda says TPMS?
- Where is my TPMS reset button?
- What happens when the TPMS light comes on?
- How do I clear my Honda TPMS?
- How do I fix my TPMS light?
- Is it OK to drive with TPMS light on?
Set the parking brake. Look for a button to the left of the steering column labeled with the TPMS icon if it’s there push and hold it until the TPMS indicator in the instrument panel blinks twice.
Why is my TPMS light on but tires are fine?
The causes can be a malfunction, or the weather changes. Other reasons why your TPMS light may still be blinking is because your tire may be damaged, or you might have gotten a recent tire replacement. Overall, the reasons can be vast, which is why it is best to take your car to a technician for professional diagnosis.
How do I clear my TPMS light?
Hold the TPMS reset button until the tire pressure light blinks three times, then release it. Start the car and wait about 20 minutes for the sensor to refresh. You will find the tire pressure monitor reset button under the steering wheel. Refer to your vehicle’s owner’s manual if you can’t find it.
How do I tell which tire pressure sensor is bad?
Measure the air pressure of each tire and record them. Then, compare the data with the one displayed in your car display panel. If the reading in one tire is different from the one displayed, it might mean that there’s a problem with the TPMS sensor in that tire.
What does it mean when my Honda says TPMS?
tire pressure monitoring system
The tire pressure monitoring system (TPMS) in your Honda is designed to alert you when one or more of your tires falls below the recommended tire pressure.
Set the parking brake. Look for a button to the left of the steering column labeled with the TPMS icon if it’s there push and hold it until the TPMS indicator in the instrument panel blinks twice.
What happens when the TPMS light comes on?
The purpose of the TPMS (Tire Pressure Monitoring System) is to alert you when tire pressure is too low and could create unsafe driving conditions. If the light is illuminated, it means your tires could be underinflated, which can lead to undue tire wear and possible tire failure.
How do I clear my Honda TPMS?
Within a few miles of driving. See your vehicle’s owner’s manual for even more. Details. You can download one at my garage.honda.com.
How do I fix my TPMS light?
On press the home button on the touch. Screen then touch vehicle settings touch tpms calibration then select calibrate if calibration failed to start appears repeat the previous. Step the calibration.
Is it OK to drive with TPMS light on?
As we mentioned earlier, a tire pressure light is a warning, not a command, so you don’t need to pull over immediately if you see it come on. However, driving on underinflated tires can be dangerous and can cause a variety of problems, including poor handling, reduced fuel efficiency, and increased tire wear.