The TPMS light on a Subaru Legacy is a warning indicator that alerts the driver when one or more of the tires are significantly under-inflated, which can create a potentially unsafe driving condition. The TPMS warning light illuminates in the Subaru Legacy when the air pressure is low in one or more of the tires, when the battery in a pressure sensor has depleted, when the TPMS receiver module has malfunctioned, or when a pressure sensor has been damaged.
To reset the TPMS warning light in a Subaru Legacy, you need to inflate all the tires to the correct air pressure. Once the tires are properly inflated, the TPMS warning light will turn off automatically when the vehicle is driven at speeds above 20 mph (32 km/h).
It’s important not to ignore the TPMS light, as tires are the only part of the vehicle that actually touch the ground, and they should always be in good condition and set to the correct pressure.
Please note that the information provided is based on the search results and may not cover all possible scenarios. If you have specific concerns about the TPMS light in your Subaru Legacy, it is recommended to consult the vehicle’s owner’s manual or visit a certified Subaru dealership for further assistance.
Contents
- How do you manually turn off TPMS light?
- What does TPMS mean on Subaru Legacy?
- How do you clear the TPMS light on a Subaru?
- How do you reset the TPMS on a Subaru Legacy?
- Can overinflated tires cause TPMS light to come on?
- Where is TPMS reset button?
- Why is my tire pressure light on when my tires are fine Subaru?
- What is the difference between tire pressure light and TPMS?
- How do I clear my TPMS warning?
- Is it OK to drive with TPMS light on?
How do you manually turn off TPMS light?
Hold the TPMS reset button until the tire pressure light blinks three times, then release it. Start the car and wait about 20 minutes for the sensor to refresh. You will find the tire pressure monitor reset button under the steering wheel. Refer to your vehicle’s owner’s manual if you can’t find it.
What does TPMS mean on Subaru Legacy?
The TPMS light indicates that one or more of your tires on your Subaru is low on pressure. This might be a result of a puncture or a leak, or it could just the result of a big swing in the outside temperature.
How do you clear the TPMS light on a Subaru?
Unfortunately, Subaru doesn’t install a TPMS reset switch on cars sold in the U.S. If the warning light remains illuminated even after you’ve confirmed that your tires are inflated to the correct pressure, you’ll need to visit a tire shop or a dealership to have the system reset.
How do you reset the TPMS on a Subaru Legacy?
To reset your tire pressure light effectively, follow these straightforward actions: Dynamic Drive Reset: Take a drive at 50 mph or faster for 10 minutes. This helps trigger a sensor reset, which could resolve the issue upon the next ignition.
Can overinflated tires cause TPMS light to come on?
If your tires are under- or over-inflated, the TPMS activates a warning light on your dashboard. When the light is steady, it means you need to have your tire pressure checked. When the light is flashing, it means you need to have your TPMS checked.
Set the parking brake. Look for a button to the left of the steering column labeled with the TPMS icon if it’s there push and hold it until the TPMS indicator in the instrument panel blinks twice.
Why is my tire pressure light on when my tires are fine Subaru?
The most common reasons a Subaru Outback tire pressure warning light stays on are a leaking tire, a wheel that no longer holds air, or a faulty tire pressure monitoring system.
What is the difference between tire pressure light and TPMS?
What is the Difference Between a TPMS Light and a Tire Pressure Light? The tire pressure light is just one part of the TPMS system. It is an indicator on your dash that lights up when your tire pressure is low. The TPMS light, available in some vehicles, may light up indicating an issue with the system.
How do I clear my TPMS warning?
On press the home button on the touch. Screen then touch vehicle settings touch tpms calibration then select calibrate if calibration failed to start appears repeat the previous. Step the calibration.
Is it OK to drive with TPMS light on?
As we mentioned earlier, a tire pressure light is a warning, not a command, so you don’t need to pull over immediately if you see it come on. However, driving on underinflated tires can be dangerous and can cause a variety of problems, including poor handling, reduced fuel efficiency, and increased tire wear.
