TPMS Frequency of Ford Focus
The TPMS (Tire Pressure Monitoring System) frequency for a Ford Focus is communicated via radio frequency (RF) technology from the sensor to the vehicle’s ECU. The specific frequency used for the TPMS in the Ford Focus is 315 MHz.
This frequency is used to transmit tire pressure information from the sensors to the vehicle’s ECU, allowing the system to monitor the air pressure inside the tires in real time and activate a warning light if it detects significant underinflation in any of the tires.
In summary, the TPMS frequency for a Ford Focus is 315 MHz, which is used to communicate tire pressure information from the sensors to the vehicle’s ECU.
If you have any further questions or need additional information, feel free to ask!
Contents
- What is the difference between 315MHz and 433MHz TPMS?
- What is the TPMS fault on a Ford Focus?
- How do I know which TPMS sensor is bad?
- What type of TPMS does ford use?
- What type of TPMS does Ford use?
- What is TPMS on Ford Focus?
- What frequency does Ford use for TPMS?
- What is the exact frequency of TPMS?
- Where is the TPMS reset button on a Ford Focus?
- Can I use any 315MHz TPMS sensor?
What is the difference between 315MHz and 433MHz TPMS?
315/433 refer to the radio frequencies (in mHz) between the TPMS sensors and receivers. most other parts of the world uses 315mHz while EU uses 433mHz. if you get install the wrong one for your system, they won’t communicate with each other.
What is the TPMS fault on a Ford Focus?
If the TPMS light ignites on your dashboard, then check the tire pressure in each tire and inflate them as necessary to the recommended PSI. This figure is located inside the driver’s side door or in your owner’s manual.
How do I know which TPMS sensor is bad?
Measure the air pressure of each tire and record them. Then, compare the data with the one displayed in your car display panel. If the reading in one tire is different from the one displayed, it might mean that there’s a problem with the TPMS sensor in that tire.
What type of TPMS does ford use?
Ford TPMS types and Fitment
The manufacturers of the Ford TPMS are Schrader Electronics, VDO and Lear. VDO and Lear manufactured the banded sensor whilst Schrader manufacture the valve stem TPMS.
What type of TPMS does Ford use?
Ford TPMS types and Fitment
The manufacturers of the Ford TPMS are Schrader Electronics, VDO and Lear. VDO and Lear manufactured the banded sensor whilst Schrader manufacture the valve stem TPMS.
What is TPMS on Ford Focus?
1 x TPMS – Tire Pressure Monitoring System BYPASS. 1 x Detailed Fitting Instructions.
What frequency does Ford use for TPMS?
315 Mhz
Sensor operates at 315 Mhz.
What is the exact frequency of TPMS?
314.9-433.92 MHz
The TPMS sensors then transmit information and communicate via a UHF signal (314.9-433.92 MHz). Anything transmitting in this range, or anything that would block a radio signal, should be avoided or moved.
Generally, you’ll find the reset button under the steering wheel.
Can I use any 315MHz TPMS sensor?
So to answer your original question, no, not all 315mhz sensors are the same. You need sensors compatible with the RDLR module you have.