The torque specification for the spark plugs on a Toyota FJ Cruiser is 14 ft-lbs .
Please note that it is important to follow the manufacturer’s recommended torque specification to ensure proper installation and prevent damage to the spark plugs or the engine.
Contents
- Do spark plugs need to be really tight?
- Should you put anti seize on spark plugs?
- What is the spark plug gap on a 2010 Toyota FJ Cruiser?
- What is the spark plug gap on a 2012 Toyota FJ Cruiser?
- What is the torque on the spark plugs on a 2008 Toyota FJ Cruiser?
- What is the spark plug gap on a 2007 Toyota FJ Cruiser?
- Are Toyota spark plugs pre gapped?
- How often should you change the spark plugs in a FJ Cruiser?
- What is the correct torque for spark plugs?
- What is the spark plug gap on a 2008 Toyota FJ Cruiser?
Do spark plugs need to be really tight?
If your using plugs without a gasket ring (the shamfered type) then hand tight plus a quarter turn – no more. If it does have the gasket ring (looks like a metal washer) and the plugs are new then hand tight plus half a turn. If the plugs are old then hand tight plus a quarter turn.
Should you put anti seize on spark plugs?
Thread breakage can sometimes involve removing the cylinder head for repair. Metal shell stretch changes the heat rating of the spark plug and can result in serious engine damage caused by pre-ignition. Do not use anti-seize or lubricant on NGK spark plugs. It is completely unnecessary and can be detrimental.
What is the spark plug gap on a 2010 Toyota FJ Cruiser?
Notes: Gap 0.044″. Iridium Long Life.
What is the spark plug gap on a 2012 Toyota FJ Cruiser?
Gap 0.044″ 1.1 mm.
What is the torque on the spark plugs on a 2008 Toyota FJ Cruiser?
Today i was reading some torque specs and discovered that the accurate torque spec for the spark play is 14 ft lb according to the fj repair manual. Last time I replaced my plug I torqued them down to I torqued them to 15 ft lbs.
What is the spark plug gap on a 2007 Toyota FJ Cruiser?
6 pc Champion Double Platinum Spark Plugs for 2007-2013 Toyota FJ Cruiser 4.0L V6
| Year Range | Make | Notes |
|---|---|---|
| 2007 | Toyota | Gap .044 |
| 2008 | Toyota | 4.0L V6;Plug Type Rec10Pypb4;Gap 0.044In |
| 2008 | Toyota | Gap .044 |
| 2009 | Toyota | 4.0L V6;Plug Type Rec10Pypb4;Gap 0.044In |
Are Toyota spark plugs pre gapped?
If you buy OEM Denso iridium spark plugs, they are already pre-gapped. Otherwise the spark plug gap should be on the sticker under the hood if you want to double check the gap specs. If Iridium plugs are used, not only are they pre-gapped, they should not be adjusted.
How often should you change the spark plugs in a FJ Cruiser?
every 30,000 miles
Toyota recommends you change your spark plugs every 30,000 miles.
What is the correct torque for spark plugs?
Recommended Torque and Tightening Angle
| Thread Size | Applicable Models | Recommended Torque |
|---|---|---|
| M10 | Stainless Gasket Type ( *1 ) | 10-15N・m |
| M12 | All Types | 15-20N・m |
| M14 | Types other than the ones shown below | 20-30N・m |
What is the spark plug gap on a 2008 Toyota FJ Cruiser?
Notes: Gap 0.044″. Iridium Long Life.
