Torque Spec for the Oil Drain Plug on a 2017 Acura TLX 3.5 V6
The torque specification for the oil drain plug on a 2017 Acura TLX 3.5 V6 is 29 foot pounds.
It’s important to use the correct torque value to ensure that the drain plug is properly secured without being over-tightened, which could potentially lead to damage.
If you have any more questions or need further assistance, feel free to ask!
Contents
- What is the average torque specification for a drain plug?
- What is the torque spec for the oil drain plug on a 2015 Acura RDX?
- How tight should an oil drain bolt be?
- Is there a torque spec for oil drain plug?
- Should I use torque wrench on oil drain plug?
- Can you hand tighten oil drain plug?
- What happens if you overtighten oil drain plug?
- Can you use impact gun on oil drain plug?
- Can I hand tighten oil drain plug?
- What is the torque on the oil drain plug on the Acura ILX?
What is the average torque specification for a drain plug?
Install the oil pan drain plug with a new O-ring and torque the plug: a. On a plastic oil pan, torque plug to 45 N·m +/- 7 N·m (33 lb·ft +/- 5 lb·ft). b. On an aluminum oil pan torque plug to 60 N·m +/- 9 N·m (44 lb·ft +/- 6 lb·ft).
What is the torque spec for the oil drain plug on a 2015 Acura RDX?
Once the engine oil has finished draining, you can fill it with fresh oil. Install the oil pan drain bolt along with the crush washer and torque it to 25-29 ft/lbs.
How tight should an oil drain bolt be?
In grab my quarter inch wrench inch. And of course inch. And a quarter. And always remember Lefty Loosey Roddy tighty don’t want that thing to come out. All right yeah get me another wrench owner.
Is there a torque spec for oil drain plug?
Okay let’s talk about drain plugs. The sign of a hack technician. Well it’s going to be an overly tightened drain plug on the oil pan.
Should I use torque wrench on oil drain plug?
Using a torque wrench can help prevent these problems because over- or under-tightening these components can lead to leaks or damage to the oil pan or filter housing. But even without a torque wrench, you can still change your oil by manually tightening the drain plug and filter to a snug but comfortable level.
Can you hand tighten oil drain plug?
Don’t ever hand tighten the engine oil drain plug. It will eventually vibrate loose and fall out. It needs to be tightened properly. While you could probably Google the torque specification for your vehicle, it’s generally around 25 to 30 ft lbs.
What happens if you overtighten oil drain plug?
You could damage the threads and cause the oil drain plug to either fall out or not be able to be re-used. You could also damage the threads in the sump pan.
Can you use impact gun on oil drain plug?
No, unless you want to strip its threads. Use a so c jet with a breaker bar for additional leverage to loosen it gently. What would you do if your mechanic stripped the oil pan drain plug threads?
Can I hand tighten oil drain plug?
The recommended torque is actually a bit tighter than I would have done by feel. The reason I know is I tighten the plug by hand and check with the torque wrench – which wouldn’t be a very good idea if I was tightening it too much! I reuse the washers over and over.
What is the torque on the oil drain plug on the Acura ILX?
Oil Grade: API*
| Viscosity: | All TEMPS….0W-20 |
|---|---|
| Capacity: | With filter 4.6 quarts. After refill check oil level. |
| Capacity: | Without filter 4.4 quarts. After refill check oil level. |
| Torque: | Oil Drain Plug…30 ft/lbs Install a new washer on the drain bolt. Only use an OE drain plug. |
