Torque Spec for Calipers on a 2013 Dodge Charger
The torque specifications for the calipers on a 2013 Dodge Charger can vary depending on the specific caliper and its location. However, I found some information from the search results that can help provide an answer.
According to a forum post on the Dodge Charger Forum, the torque spec for the Disc Brake Caliper Adapter Mounting Bolts – Front/Rear is 70 ft. lbs. Additionally, the torque spec for the Caliper Adapter Bolts – Front/Rear is 125 ft. lbs.
Another forum post on the same forum mentioned that the torque spec for the Caliper Bolts is 44 ft. lbs in the front and 23 ft. lbs in the rear.
Please note that these torque specifications are based on user discussions on the forum and may not be official factory specifications. It’s always a good idea to consult the vehicle’s service manual or reach out to a certified mechanic for the most accurate and up-to-date information.
I hope this helps! Let me know if you have any other questions.
Contents
- What is the brake torque?
- What is the torque spec?
- What are the torque specs on a 5.7 Hemi?
- What are torque specs?
- What is the torque setting for the bolts?
- What is the torque for the caliper mounting bolts?
- How do you tighten caliper brakes?
- What is the torque on the calipers on a 2013 Dodge Ram 1500?
- Do you have to torque brake calipers?
- What torque for disc brake calipers?
What is the brake torque?
Brake torque is essentially the power of the braking system. The brake caliper acts on the disc at a certain distance from the hub center, known as the effective radius. The force exerted by the caliper, multiplied by the effective radius of the system equals the brake torque.
What is the torque spec?
When attaching a wheel to a vehicle, torque specifications are the amount of force recommended on the hardware to ensure proper installation. Following exact torque specifications matters for a number of reasons. Too much torque can result in overtightening, which has significant consequences.
What are the torque specs on a 5.7 Hemi?
Torque Specifications for Gen 3 Hemi Engines
| Fastener Type | 5.7L |
|---|---|
| Oil Pump, Pickup Tube, and Attaching Bolt | 21 ft.-lbs. |
| Oil Pump Cover | 95 in.-lbs. |
| Camshaft Sprocket | 90 ft.-lbs. |
| Camshaft Tensioner | 21 ft.-lbs. |
What are torque specs?
When attaching a wheel to a vehicle, torque specifications are the amount of force recommended on the hardware to ensure proper installation. Following exact torque specifications matters for a number of reasons. Too much torque can result in overtightening, which has significant consequences.
What is the torque setting for the bolts?
US Recommended Bolt Torque
| Size | Recommended Torque | |
|---|---|---|
| Grade 2 | Brass | |
| 1/2″ | 37 | 37 |
| 9/16″ | 53 | 51 |
| 5/8″ | 73 | 85 |
What is the torque for the caliper mounting bolts?
Brake caliper bracket bolts connect the caliper bracket to the spindle or knuckle, never seen one with any kind of sleeve. Usually torqued to 80+ ft lbs, big bolts that usually use a 20+mm or 5/8 or larger socket.
How do you tighten caliper brakes?
Themselves. Then using your other hand. Pull the brake cable just finger tight release. Take your Allen key and tighten back up that pinch Pole.
What is the torque on the calipers on a 2013 Dodge Ram 1500?
The torque specifications for the light-duty package are 130 ft./lbs. for the front caliper brackets and 120 ft./lbs. for the rear caliper brackets. The heavy-duty front brake caliper bracket has a torque specification of 275 ft./lbs.
Do you have to torque brake calipers?
A vehicle needs brake torque to come to a stop. When you apply your brakes, the brake calipers press the pads against the brake rotors.
What torque for disc brake calipers?
required position and then tighten the two caliper fixing bolts alternately by small amounts each time. Tightening torque: 6 – 8 N·m {53 – 69 in. lbs.} or three clicks.
