The torque specifications for the brake calipers on a 2013 Dodge Ram 1500 can vary depending on the specific model and brake package. However, here are some torque specs that you can consider:
– Caliper Mounting Pins (Front): 24 ft-lbs
– Caliper Adapter Mounting Bolts (Front, 1500): 130 ft-lbs
– Caliper Adapter Mounting Bolts (Rear, 1500): 120 ft-lbs
– Caliper Adapter Mounting Bolts (Front, 2500/3500): 275 ft-lbs
– Caliper Adapter Mounting Bolts (Rear Upper, 2500/3500): 163 ft-lbs
Please note that these torque specifications are based on the information provided in the search results and may not be applicable to all models or brake packages. It is always recommended to consult the vehicle’s owner’s manual or a certified mechanic for the most accurate and up-to-date torque specifications for your specific vehicle.
Contents
- What is the torque spec of the caliper bolts on a 2013 Dodge Avenger?
- What are the torque specs for a 2011 Ram 1500?
- Do brake caliper bolts need lock tight?
- What is the torque on a Dodge Ram brake caliper bolt?
- What are the torque specs on a 5.7 Hemi?
- Do you need to torque caliper bolts?
- How much torque does a 2013 Ram 1500 have?
- Do you need to torque brake caliper bolts?
- What is the torque on the caliper bolts on a 2013 Dodge Challenger?
- What is the torque for brake caliper mount?
What is the torque spec of the caliper bolts on a 2013 Dodge Avenger?
The caliper bracket bolts have a torque specification of 80 ft/lbs. The rear brakes use a single piston caliper mounted on two guide pins that have a torque spec of 32 ft/lbs. Like the front, the upper pin has a special sleeve designed to eliminate noise.
What are the torque specs for a 2011 Ram 1500?
Compression Ratio 10.5:1 Power 390 hp @ 5,600 rpm Torque 407 lb. -ft. @ 4,000 rpm Max.
Do brake caliper bolts need lock tight?
The caliper bolts & guide pin mounting screws need to have the medium strength (blue) loctite applied to the threads !
What is the torque on a Dodge Ram brake caliper bolt?
The heavy-duty front brake caliper bracket has a torque specification of 275 ft/lbs. The rear caliper bracket for the heavy-duty caliper has a torque specification of 163 ft/lbs for the upper bolt and 190 ft/lbs for the lower bolt. Both versions have a torque specification of 32 ft/lbs for the guide pins.
What are the torque specs on a 5.7 Hemi?
Torque Specifications for Gen 3 Hemi Engines
| Fastener Type | 5.7L |
|---|---|
| Oil Pump, Pickup Tube, and Attaching Bolt | 21 ft.-lbs. |
| Oil Pump Cover | 95 in.-lbs. |
| Camshaft Sprocket | 90 ft.-lbs. |
| Camshaft Tensioner | 21 ft.-lbs. |
Do you need to torque caliper bolts?
Yes you do. The caliper bracket bolts many times are torqued to ABOUT 90 ftlp while the guide pins are much less about 45 or so.
How much torque does a 2013 Ram 1500 have?
269 to 407 lb-ft2013 RAM 1500 / Torque
The base Tradesman trim of the 2013 Ram 1500 comes standard with a 4.7-liter V8 that puts out 310 horsepower and 330 pound-feet of torque. Available engines include the new 3.6-liter V6 that produces 305 horsepower and 269 pound-feet of torque or the 5.7-liter Hemi V8 with 395 horsepower and 407 pound-feet of torque.
Do you need to torque brake caliper bolts?
As for the caliper, it’s also good technique to use a torque wrench. The main reason is so you don’t over-tighten then, which might strip out the housing the bolt goes into, or ruin the mounting bolt in the first place.
What is the torque on the caliper bolts on a 2013 Dodge Challenger?
The front brake caliper bracket should be tightened to 70 ft/lbs and the rear should tightened 85 ft/lbs. The caliper bolts have a torque spec of 44 ft/lbs and 23 ft/lbs in the rear. Pressure bleeding is highly recommended to bleed this brake system to ensure all air is removed from the system.
What is the torque for brake caliper mount?
Brake caliper bracket bolts connect the caliper bracket to the spindle or knuckle, never seen one with any kind of sleeve. Usually torqued to 80+ ft lbs, big bolts that usually use a 20+mm or 5/8 or larger socket.
