Torque Specs for Brake Caliper on a 2014 Ford Edge
The torque specifications for the brake caliper on a 2014 Ford Edge are as follows:
– The caliper bracket has a torque spec of 133 Nm (98 ft. lb).
– The caliper guide pins have a torque specification of 26 Nm (19 ft. lb).
– The guide pin bolts should be tightened to 88 Nm (65 ft. lb).
These specifications ensure proper installation and functioning of the brake caliper on a 2014 Ford Edge.
Contents
- Should caliper bolts be tight?
- What is the torque on brake caliper mounting bolts?
- What is the torque for disc brake caliper mount?
- Do you need a torque wrench for calipers?
- How tight do brake caliper bolts need to be?
- What is the torque spec for the caliper bracket on a 2014 Ford Edge?
- What is the brake torque?
- Do you need a torque wrench for brake calipers?
- Do brake calipers need a torque wrench?
- What is the torque on the calipers on a Ford Edge?
Should caliper bolts be tight?
Because caliper bolts MUST stay on, they need a LOT of torque. AutoZone, for example, recommends 113 pound feet of torque. To put that number in perspective, the average person can ( according to NASA) apply about 15 pound feet with a bare hand.
What is the torque on brake caliper mounting bolts?
Brake caliper bracket bolts connect the caliper bracket to the spindle or knuckle, never seen one with any kind of sleeve. Usually torqued to 80+ ft lbs, big bolts that usually use a 20+mm or 5/8 or larger socket.
What is the torque for disc brake caliper mount?
required position and then tighten the two caliper fixing bolts alternately by small amounts each time. Tightening torque: 6 – 8 N·m {53 – 69 in. lbs.} or three clicks.
Do you need a torque wrench for calipers?
It would be a good idea – calipers serve a very important function and you don’t want them coming loose. That said I have done many of them (in the past) without a torque wrench but not anymore. Don’t want to break or strip a bolt by over torquing then you have a whole new set of problems to overcome.
How tight do brake caliper bolts need to be?
These require tightening to 80 plus lbs ft or in general, as tight as you can get them with a 1/2 inch socket set ratchet. The bolts you are referring to are either the smaller ones you often get a set of with new brake pads and are sometimes pre-coated with locktite, or require locktite when being fitted.
What is the torque spec for the caliper bracket on a 2014 Ford Edge?
The caliper bracket has a torque spec of 133 Nm (98 ft. lb).
What is the brake torque?
Brake torque is a way to measure the pressure exerted on the brake shoes and/or the rotors when slowing down or stopping the rotation of the wheels. A vehicle needs brake torque to come to a stop. When you apply your brakes, the brake calipers press the pads against the brake rotors.
Do you need a torque wrench for brake calipers?
As for the caliper, it’s also good technique to use a torque wrench. The main reason is so you don’t over-tighten then, which might strip out the housing the bolt goes into, or ruin the mounting bolt in the first place.
Do brake calipers need a torque wrench?
The caliper bolts or the lug nuts? In any event the answer is “yes” provided you tighten them down enough so they will not work loose and your mechanic is only a couple of miles away. Originally Answered: What size torque wrench do I need for brakes?
What is the torque on the calipers on a Ford Edge?
Should be torqued to eighteen foot pounds. Next come the seventeen millimeter guide pin bolts and nose. Get torque to 65 foot-pounds. Also note the longer one goes on the top of the caliper.
