Torque on the Subaru BRZ Oil Drain Plug
The torque specification for the oil drain plug on the Subaru BRZ is 28.9 ft-lbs according to the Subaru Owners manual. This torque value ensures easy removal for the next oil change and is recommended to be followed using a torque wrench for accurate tightening.
It’s important to note that there are varying opinions and experiences regarding the torque required for the oil drain plug, with some users reporting different values. However, the official specification from the Subaru Owners manual is 28.9 ft-lbs, and it is recommended to adhere to this specification for the proper maintenance of the vehicle.
If you have any further questions or need additional information, feel free to ask!
Contents
- What is the torque spec of the oil drain plug on a 2013 Subaru Impreza?
- Do you need to torque a sump plug?
- What happens if you over torque a drain plug?
- How tight should a drain plug be?
- What is the torque on the sump plugs on a gt86?
- What size is the oil drain bolt on a BRZ?
- What is the torque on the GT86 oil drain?
- Should you use a torque wrench on oil drain plug?
- What is the torque spec of the drain plug on a Subaru Impreza?
- What is the torque spec for oil drain plug?
What is the torque spec of the oil drain plug on a 2013 Subaru Impreza?
Oil Grade: SM
Viscosity: | All TEMPS….0W-20 |
---|---|
Capacity: | With filter 5.1 quarts. After refill check oil level. |
Torque: | Oil Drain Plug…31.0 ft/lbs Install a new washer on the drain bolt. Only use an OE drain plug. |
Notes: | (1) Synthetic oil is required. |
Do you need to torque a sump plug?
If the service manual states a torque setting for a particular fixing on a piece of machinery of any kind then it should be followed… and yes… sump plugs usually have a recommended torque setting.
What happens if you over torque a drain plug?
Over-tightening the fastener will strip threads causing damage to the oil pan.
How tight should a drain plug be?
In grab my quarter inch wrench inch. And of course inch. And a quarter. And always remember Lefty Loosey Roddy tighty don’t want that thing to come out. All right yeah get me another wrench owner.
What is the torque on the sump plugs on a gt86?
15 ft/lbs
Note: Installation Torque Specs: 15 ft/lbs for all magnetic oil drain plugs. Do not exceed the maximum torque rating of 15 ft/lbs.
What size is the oil drain bolt on a BRZ?
Dorman – Standard Engine Oil Drain Plug: M16-1.50 Thread, 17 mm Head (Sold by each) (Part No. 090-054)
What is the torque on the GT86 oil drain?
15 ft/lbs
Note: Installation Torque Specs: 15 ft/lbs for all magnetic oil drain plugs.
Should you use a torque wrench on oil drain plug?
Not usually but a lot of lube techs over-torque drainplugs and oil filter caps on cartridge type oil filters which causes big problems, so they should be required to use them. It is not a required tool for the drain plug, no. On the other hand, you don’t want to overtighten the drain stopper.
What is the torque spec of the drain plug on a Subaru Impreza?
The drain plug has a torque spec of 30.8 ft/bs there is a crush washer that is supposed to be changed every time you change the oil.
What is the torque spec for oil drain plug?
Specification. For the drain plug. So actually the less amount of force you use during an oil. Change makes you a better technician. Because if you’re over tightening an oil filter.