What is the torque on the oil drain plug on a Honda Passport?

Torque on the Oil Drain Plug of a Honda Passport
The torque specification for the oil drain plug on a Honda Passport may vary depending on the specific model and year. However, based on the available information, here are some torque specifications for the oil drain plug on Honda vehicles:
– According to a forum post on the Honda Pilot Forums, the torque specification for the oil drain plug on a Honda Passport is not mentioned specifically, but the user recommends using a torque wrench set to 29 lb/ft (39 N/m or 4.0 kgf/m) of torque for the oil drain plug on a Honda Fit, assuming the specification has not changed since their Honda Fit model.
– Another forum post on Honda-Tech suggests that the torque specification for the oil drain plug on a 1995 Honda Civic DX with a steel pan is 30 lb/ft, while for an aluminum pan, it is 29 lb/ft.
It is important to note that these torque specifications are based on user experiences and may not be applicable to all Honda Passport models. To ensure accuracy, it is recommended to consult the owner’s manual or contact a Honda dealership for the specific torque specification for your Honda Passport model.
Please keep in mind that over-tightening the drain plug can lead to stripped threads or damage to the oil pan, while under-tightening can result in leaks. It is always a good practice to use a torque wrench to achieve the recommended torque specification and replace the crush washer with each oil change to ensure a proper seal.
I hope this information helps! Let me know if you have any other questions.

What is the torque on a Honda drain plug?

Drain plug: 39 N.m / 4.0 kgf. m / 29lbf. ft for drain plug with new crush washer.

Can you overtighten oil drain plug?

And while it’s harder to do, you can damage the rubber gasket atop the oil filter if you really overtighten it. If you overtighten an oil drain plug, there is a chance it may not loosen the next time, and you could mess up the oil pan in some way, or fashion.

What is the torque on the drain plug on a Honda Passport?

30 ft/lbs
Torque: Oil Drain Plug… 30 ft/lbs Install a new washer on the drain bolt. Only use an OE drain plug.

What is the torque spec for oil drain plug?

Specification. For the drain plug. So actually the less amount of force you use during an oil. Change makes you a better technician. Because if you’re over tightening an oil filter.

Can you use torque wrench to loosen oil drain plug?

You can, but why would you want to? If you own a torque wrench, you likely own a proper socket wrench as well – use that for loosening. I learned from somewhere, some years ago, that a torque wrench should only be used for tightening, if it’s the “micrometer” or “click” type.

How tight should the oil drain plug be?

In grab my quarter inch wrench inch. And of course inch. And a quarter. And always remember Lefty Loosey Roddy tighty don’t want that thing to come out. All right yeah get me another wrench owner.

Is torque drain plug necessary?

Using a torque wrench can help prevent these problems because over- or under-tightening these components can lead to leaks or damage to the oil pan or filter housing. But even without a torque wrench, you can still change your oil by manually tightening the drain plug and filter to a snug but comfortable level.

Should oil drain plug be hand tight?

You never want the drain plug too loose as losing the drain plug and leaving your oil along the interstate isn’t fun. The best advice on the drain plug is to tighten it finger tight where the gasket touches the drain pan surface, then roughly a quarter turn on the drain plug.

Do I need a torque wrench for oil drain plug?

Using a torque wrench can help prevent these problems because over- or under-tightening these components can lead to leaks or damage to the oil pan or filter housing. But even without a torque wrench, you can still change your oil by manually tightening the drain plug and filter to a snug but comfortable level.

What happens if you over torque a drain plug?

If you overtighten an oil drain plug, there is a chance it may not loosen the next time, and you could mess up the oil pan in some way, or fashion. You may damaged the thread, broke the oil drain gasket, and very hard to removed the plug for the next oil change.