The torque on the lug nuts of a Toyota Yaris is recommended to be 76 ft-lb or 103 Nm. It is important to torque the lug nuts to the manufacturer’s recommended torque specification to ensure proper wheel installation and safety. When torquing the lug nuts, it is advised to have the wheel as close to the ground as possible, almost touching the ground or pavement, to ensure a proper torque reading and wheel setting.
Contents
- What is the power torque of Toyota Yaris?
- What is the torque on the Yaris wheel lugs?
- How much torque does a 2010 Toyota Yaris wheel nut have?
- What size are the nuts on a Toyota Yaris?
- Can you over torque lugs?
- How do you torque lug nuts by hand?
- Do Toyota lug nuts swell?
- What size are the wheel nuts on a 2008 Toyota Yaris?
- What is the torque on Toyota lug nuts?
- What torque should my lug nuts be?
What is the power torque of Toyota Yaris?
A. Toyota Yaris generates a torque of 140Nm@4200rpm and power of 107PS@6000rpm. Yaris is equipped with a 1.5 Dual VVT-i Engine with 4 cylinders. It is available in 1 fuel variant(s) Petrol with Manual and Automatic transmission.
What is the torque on the Yaris wheel lugs?
76 ft/lbs for sure.
How much torque does a 2010 Toyota Yaris wheel nut have?
Yep, 76 lb/ft.
What size are the nuts on a Toyota Yaris?
Thread size M12 x 1.5. 4 X ALLOY WHEEL NUTS – TOYOTA, YARIS. Fits all standard alloy wheels.
Can you over torque lugs?
Each and every nut and bolt on a vehicle has a required torque value for safety, over tightening or over torquing as well as too little torque can cause a dangerous condition. Over torquing of the lug nut could cause one or more to shear off under pressure and could cause a fatal accident.
How do you torque lug nuts by hand?
The most common sequence is to move in a ‘star’ pattern on a 5-lug setup—start with a top-corner lug, and then move diagonally across until each lug has been tightened. On 4-lug wheels, move diagonally for the first bolt, then across, then diagonally again.
Do Toyota lug nuts swell?
Sometimes, an impact gun can damage the rust-resistant coating of Toyota lug nuts, leading to swollen lug nuts.
What size are the wheel nuts on a 2008 Toyota Yaris?
Additional information
| Hex Size | 21mm Hex |
|---|---|
| Thread Size | M12 x 1.5 |
| Seat | Flat Seat |
| Type | Wheel nuts |
| Finish | Chrome Plated |
What is the torque on Toyota lug nuts?
76 ft-lbs for aluminum wheels, 83 ft-lbs for steel wheels.
What torque should my lug nuts be?
Under- or over-tightening wheel-attaching hardware can be damaging and dangerous.
| Hardware Bolt or Stud Size | Typical Torque Range in Ft/Lbs | Minimum Number of Turns of Hardware Engagement |
|---|---|---|
| 12 x 1.5 mm | 70 – 80 | 6.5 |
| 12 x 1.25 mm | 70 – 80 | 8 |
| 14 x 1.5 mm | 85 – 90 | 7.5 |
| 14 x 1.25 mm | 85 – 90 | 9 |
