The torque on the lug nuts of a Honda Passport is typically 127Nm. It is important to use a torque wrench instead of an impact wrench to ensure proper torqueing.
Contents
- How much torque do I need to remove lug nuts?
- What is the torque setting for wheel nuts?
- Where can I find torque specs for my car?
- What are the torque specs for lug nuts?
- What lug pattern is a Honda Passport?
- What is the torque on the lug nuts on a 2012 Honda Pilot?
- How much torque do I need in an impact wrench?
- Are Honda bolts standard or metric?
- What is the torque spec on Honda lug nuts?
- What size are the lug nuts on a Honda Passport?
How much torque do I need to remove lug nuts?
For most passenger vehicles equipped with standard lug nuts, a 1/2 inch drive impact wrench providing around 300-400 ft-lbs of torque is sufficient. This covers common lug nut sizes of 14-21 mm on sedans, coupes, hatchbacks and some light trucks or SUVs.
What is the torque setting for wheel nuts?
The optimum torque value for your car or mounted rims can be found in the vehicle manual. It depends on the car model, rim size, design (aluminium or steel rims) and number of bolts. It is normally between 110 N⋅m and 120 N⋅m.
Where can I find torque specs for my car?
Where To Find The Correct Manufacturer Recommended Torque Specs. The torque specs for the axle nut (and other nuts and bolts) should be listed in the dealership/shop guide provided by the manufacturer. If you can’t find that information, or if you don’t have a guide, you can find the specs in the service manual.
What are the torque specs for lug nuts?
Under- or over-tightening wheel-attaching hardware can be damaging and dangerous.
| Hardware Bolt or Stud Size | Typical Torque Range in Ft/Lbs | Minimum Number of Turns of Hardware Engagement |
|---|---|---|
| 12 x 1.5 mm | 70 – 80 | 6.5 |
| 12 x 1.25 mm | 70 – 80 | 8 |
| 14 x 1.5 mm | 85 – 90 | 7.5 |
| 14 x 1.25 mm | 85 – 90 | 9 |
What lug pattern is a Honda Passport?
5×120
While early Honda Passports come with a 6×139. 7 bolt pattern, the modern Honda Passport features a 5×120 bolt pattern. Both of these lug configurations are quite popular, and we’re loaded up with a slew of fantastic options when you want to upgrade your Honda’s style and performance.
What is the torque on the lug nuts on a 2012 Honda Pilot?
Wheel nut torque: 127 N·m (13.0 kgf·m, 94 lbf·ft).
How much torque do I need in an impact wrench?
For most automotive applications, an impact wrench with a torque of around 100 to 500 foot-pounds should suffice. However, you may need a tool with higher torque for heavy-duty tasks like removing rusted axle nuts.
Are Honda bolts standard or metric?
metric system
Aside from the U.S., most countries use the metric system for classifying hardware, which means your Honda is assembled with metric hardware. You’ve just narrowed down your search to a single aisle. Most metric bolts you’ll find in the hardware store are stamped with some sort of marking.
What is the torque spec on Honda lug nuts?
What torque spec are Honda Civic lug nuts? Honda specifies a torque of 108 Nm for the lug nuts on most Civics. This is the optimal tightening force to keep the wheels securely fastened without over-tightening. It’s critical to use a properly calibrated torque wrench when tightening lug nuts.
What size are the lug nuts on a Honda Passport?
The most common thread sizes of Honda Passport lug nuts are M14x1. 5mm. The seating type refers to the part of the nut that makes contact with the wheel lug seat.
