What is the torque on the caliper bolts on a Dodge Ram 3500?

Torque on Caliper Bolts for Dodge Ram 3500
The torque specifications for the caliper bolts on a Dodge Ram 3500 can vary depending on the specific model and year. However, based on the provided search results, the torque specs for the caliper bolts on the Dodge Ram 3500 are as follows:
– Front Caliper Mounting Pins: 133 ft/lbs for the heavy-duty package for the 2500 and 3500.
– Front Caliper Adapter Mounting Bolts: 176 ft/lbs for the light-duty package and 176-530 ft/lbs for the heavy-duty package.
– Rear Caliper Mounting Pins: 30-133 ft/lbs.
– Rear Caliper Adapter Mounting Bolts: 163-465 ft/lbs.
– Front Caliper Bracket Bolts: 250 ft/lbs for the 2500 chassis.
It’s important to note that these torque specifications are based on the provided search results and may vary for different models and years of the Dodge Ram 3500. Always refer to the specific vehicle’s service manual for the most accurate and up-to-date torque specifications.

Do you need to torque brake caliper bolts?

As for the caliper, it’s also good technique to use a torque wrench. The main reason is so you don’t over-tighten then, which might strip out the housing the bolt goes into, or ruin the mounting bolt in the first place.

What is the torque for brake caliper mount?

Brake caliper bracket bolts connect the caliper bracket to the spindle or knuckle, never seen one with any kind of sleeve. Usually torqued to 80+ ft lbs, big bolts that usually use a 20+mm or 5/8 or larger socket.

What is the brake torque?

Brake torque is essentially the power of the braking system. The brake caliper acts on the disc at a certain distance from the hub center, known as the effective radius. The force exerted by the caliper, multiplied by the effective radius of the system equals the brake torque.

What is the torque on a Dodge Ram brake caliper bolt?

The heavy-duty front brake caliper bracket has a torque specification of 275 ft/lbs. The rear caliper bracket for the heavy-duty caliper has a torque specification of 163 ft/lbs for the upper bolt and 190 ft/lbs for the lower bolt. Both versions have a torque specification of 32 ft/lbs for the guide pins.

What is the torque specs for the front brake caliper of a 2017 Ram 3500?

Hey everyone, After looking up Google I saw the front Torque spec for the brake clipper is 275 ft/lbs.

What is the torque on the caliper bolts on a 2004 Dodge Ram 2500?

Front Caliper and Bracket:
Install the caliper slide pin bolts tighten to 24 ft. lbs. Install the caliper bracket mounting bolts and tighten to 130 ft. lbs..

How tight do brake caliper bolts need to be?

The caliper retaining bolts are the big ones that hold the main body of the caliper to the hub assembly. They are quite big, often 15–19mm bolts and take a fair effort to crack them off. These require tightening to 80 plus lbs ft or in general, as tight as you can get them with a 1/2 inch socket set ratchet.

What is the torque on a 2005 Dodge Ram brake caliper?

On the 2005 Dodge RAM 3500 Truck, 2WD, the caliper slide pin bolts are to be torqued to 24 ft. lbs.

Do you need to torque caliper bolts?

Yes you do. The caliper bracket bolts many times are torqued to ABOUT 90 ftlp while the guide pins are much less about 45 or so.

Do brake calipers need a torque wrench?

The caliper bolts or the lug nuts? In any event the answer is “yes” provided you tighten them down enough so they will not work loose and your mechanic is only a couple of miles away. Originally Answered: What size torque wrench do I need for brakes?