Torque on Caliper Bolts for Dodge Caravan
The torque specifications for the caliper bolts on a Dodge Caravan can vary depending on the specific model and year. However, based on the information available, the torque specifications for the caliper bolts on a Dodge Caravan are as follows:
– Caliper Guide Pin Bolts: 26 ft-lbs (35 N.m) for both the front and rear calipers.
– Caliper Bracket Bolts: 180 Nm (133 lb ft).
It’s important to note that these torque specifications may vary for different models and years, so it’s always best to consult the specific vehicle’s manual for the accurate torque specifications.
If you need further assistance with your Dodge Caravan or any other automotive-related questions, feel free to ask!
Contents
- What are torque specs?
- What is the torque on brake caliper mounting bolts?
- What is the torque on a Dodge Ram caliper?
- What is torque spec for lug nuts?
- How do I know which torque wrench I need?
- Should you put anti seize on caliper bolts?
- What torque for disc brake calipers?
- What is the brake torque?
- How tight should disc brakes be?
- Do I need a torque wrench for caliper bolts?
What are torque specs?
When attaching a wheel to a vehicle, torque specifications are the amount of force recommended on the hardware to ensure proper installation. Following exact torque specifications matters for a number of reasons. Too much torque can result in overtightening, which has significant consequences.
What is the torque on brake caliper mounting bolts?
Brake caliper bracket bolts connect the caliper bracket to the spindle or knuckle, never seen one with any kind of sleeve. Usually torqued to 80+ ft lbs, big bolts that usually use a 20+mm or 5/8 or larger socket.
What is the torque on a Dodge Ram caliper?
The torque specifications for the light-duty package are 130 ft/lbs for the front caliper brackets and 120 ft/lbs for the rear caliper brackets. The heavy-duty front brake caliper bracket has a torque specification of 275 ft/lbs.
What is torque spec for lug nuts?
Under- or over-tightening wheel-attaching hardware can be damaging and dangerous.
| Hardware Bolt or Stud Size | Typical Torque Range in Ft/Lbs | Minimum Number of Turns of Hardware Engagement |
|---|---|---|
| 12 x 1.25 mm | 70 – 80 | 8 |
| 14 x 1.5 mm | 85 – 90 | 7.5 |
| 14 x 1.25 mm | 85 – 90 | 9 |
| 7/16 in. | 70 – 80 | 9 |
How do I know which torque wrench I need?
If you are working with large and heavy-duty nuts and bolts, a ¾ to 1-inch wrench is most likely your best choice. For smaller jobs, a 1/4-inch or 3/8-inch torque wrench will be more suitable. It is also important to consider the range of torque your wrench can provide.
Should you put anti seize on caliper bolts?
No anti-seize required. The steel caliper bolts screws into the aluminum carrier. Anytime you mate steel and aluminum, you should use anti-seize to prevent corrosion and galling the threads.
What torque for disc brake calipers?
required position and then tighten the two caliper fixing bolts alternately by small amounts each time. Tightening torque: 6 – 8 N·m {53 – 69 in. lbs.} or three clicks.
What is the brake torque?
Brake torque is essentially the power of the braking system. The brake caliper acts on the disc at a certain distance from the hub center, known as the effective radius. The force exerted by the caliper, multiplied by the effective radius of the system equals the brake torque.
How tight should disc brakes be?
Key to tighten each of the bolts up correctly. Now the torque setting for these is around eight newton meters. But you just need to ensure that they’re tight. So there’s no risk of the caliper.
Do I need a torque wrench for caliper bolts?
As for the caliper, it’s also good technique to use a torque wrench. The main reason is so you don’t over-tighten then, which might strip out the housing the bolt goes into, or ruin the mounting bolt in the first place.
