The torque specifications for the caliper bolts on a 2012 Dodge Challenger vary depending on the specific bolt. Here are the torque specs for the different caliper bolts:
– Front caliper guide bolts: 44 ft/lbs
– Rear caliper guide bolts: 23 ft/lbs
– Front caliper bracket bolts: 70 ft/lbs
– Rear caliper bracket bolts: 85 ft/lbs
– Brake hose to caliper bolt: 37 ft/lbs
Please note that these torque specifications are specific to the 2015 Dodge Challenger R/T model, but they should be applicable to the 2012 model as well. It’s always a good idea to consult the vehicle’s owner’s manual or contact a certified Dodge dealership for the most accurate and up-to-date torque specifications.
Contents
- What size calipers are on a Dodge Challenger?
- Do I need a torque wrench for caliper bolts?
- What is the torque on brake caliper mounting bolts?
- What are the torque specs on a 5.7 Hemi?
- What is the brake torque?
- Should you put anti seize on caliper bolts?
- What is the torque spec of the calipers on a 2012 Dodge Charger?
- What is the torque spec for the brake calipers on a 2014 Dodge Avenger?
- What torque for disc brake calipers?
- What is the torque specs for the brake caliper on a 2012 Dodge Ram 1500?
What size calipers are on a Dodge Challenger?
Touring Brake Package Standard on Challenger SXT Front Rotor size and type in. (mm) 12.6 x 1.1 (320 x 28) vented Caliper size and type 60 (2.36) single-piston sliding with aluminum housing Swept area 1,671 sq. cm (259 sq. in.)
Do I need a torque wrench for caliper bolts?
As for the caliper, it’s also good technique to use a torque wrench. The main reason is so you don’t over-tighten then, which might strip out the housing the bolt goes into, or ruin the mounting bolt in the first place.
What is the torque on brake caliper mounting bolts?
Brake caliper bracket bolts connect the caliper bracket to the spindle or knuckle, never seen one with any kind of sleeve. Usually torqued to 80+ ft lbs, big bolts that usually use a 20+mm or 5/8 or larger socket.
What are the torque specs on a 5.7 Hemi?
Torque Specifications for Gen 3 Hemi Engines
| Fastener Type | 5.7L |
|---|---|
| Oil Pump, Pickup Tube, and Attaching Bolt | 21 ft.-lbs. |
| Oil Pump Cover | 95 in.-lbs. |
| Camshaft Sprocket | 90 ft.-lbs. |
| Camshaft Tensioner | 21 ft.-lbs. |
What is the brake torque?
Brake torque is essentially the power of the braking system. The brake caliper acts on the disc at a certain distance from the hub center, known as the effective radius. The force exerted by the caliper, multiplied by the effective radius of the system equals the brake torque.
Should you put anti seize on caliper bolts?
No anti-seize required. The steel caliper bolts screws into the aluminum carrier. Anytime you mate steel and aluminum, you should use anti-seize to prevent corrosion and galling the threads.
What is the torque spec of the calipers on a 2012 Dodge Charger?
The caliper bolts have a torque spec of 44 ft/lbs and 23 ft/lbs in the rear. Pressure bleeding is highly recommended to bleed this brake system to ensure all air is removed from the system.
What is the torque spec for the brake calipers on a 2014 Dodge Avenger?
The caliper bracket bolts have a torque specification of 80 ft/lbs. The rear brakes use a single piston caliper mounted on two guide pins that have a torque spec of 32 ft/lbs. Like the front, the upper pin has a special sleeve designed to eliminate noise.
What torque for disc brake calipers?
required position and then tighten the two caliper fixing bolts alternately by small amounts each time. Tightening torque: 6 – 8 N·m {53 – 69 in. lbs.} or three clicks.
What is the torque specs for the brake caliper on a 2012 Dodge Ram 1500?
The torque specifications for the light-duty package are 130 ft/lbs for the front caliper brackets and 120 ft/lbs for the rear caliper brackets. The heavy-duty front brake caliper bracket has a torque specification of 275 ft/lbs.
