What is the torque on Subaru wheel spacers?

Torque on Subaru Wheel Spacers
When it comes to the torque on Subaru wheel spacers, it’s crucial to follow the manufacturer’s recommendations to ensure proper installation and safety. The torque value for wheel spacers can typically be found in the vehicle’s owner’s manual or provided by the wheel spacer installer. It’s important to use a torque wrench to accurately tighten the wheel bolts evenly to the specified torque value. This helps ensure that the wheel spacers are properly installed and secured to the correct specifications. Additionally, it’s recommended to use the same star pattern used when reinstalling the wheel while tightening the wheel spacers to prevent incorrectly torqued wheels .
It’s worth noting that the specific torque value for Subaru wheel spacers may vary depending on the type and model of the spacers. For example, a source mentions that the torque recommendations for a set of wheel spacers for a Porsche is 83 ft lbs, but it’s important to follow the manufacturer’s recommendations for the specific Subaru wheel spacers being used.
In summary, to determine the exact torque value for Subaru wheel spacers, it’s best to refer to the owner’s manual or the recommendations provided by the wheel spacer installer for the specific model and type of spacers being used.
If you have any further questions or need additional information, feel free to ask!

Do I need to Retorque my wheel spacers?

They should be retorqued once after driving 50 miles after initial installation, and then they are good (until you remove them again).

Do you have to tighten spacers?

Also, by adding wheel spacers you are adding more components, and the more components, the more potential for failure. Make sure to properly tighten and torque all of the spacers’ bolts and nuts, and you should never have an issue.

Are there any negatives to wheel spacers?

As mentioned above, wheel spacers can also wear out suspension parts more quickly. This can be detrimental in the long term, but it isn’t inherently unsafe. Sometimes, wheel spacers can cause your tires to rub on the edges.

How tight should wheel spacers be torqued to?

between 85-110 ft-lbs
Install the wheel onto the wheel spacer using the lug nuts removed in Step 2. Tighten the lugs nuts in the appropriate star pattern as shown in Step 4. Torque the lug nuts to the torque specified in your owner’s manual. Typically, this will be between 85-110 ft-lbs depending on the make and model of your vehicle.

How safe are bolt on wheel spacers?

Wheel spacers and adapters can be safe if you purchase a high-quality product, install them to spec, and routinely inspect them for signs of damage.

How often do you torque wheel spacers?

How Often Should I Torque My Wheel Spacers? You should also re-torque your new wheel spacers after the first 50 to 100 driving miles. This is necessary due to the chance of thermal stresses and to prevent the lugs from backing off during that period.

How often do you check torque on wheel spacers?

100 miles
How often should you check wheel spacers? If you’re talking about the metal disc spacers that shim the wheel out from the hub, then recheck the lug nut torques at 100 miles after having rotated or remounted a wheel. Also, when removing a wheel for any reason, check the spacer for any cracks or corrosion.

Should I lock tight wheel spacers?

Actually, it is optional to use Loctite on wheel spacers. As long as you use quality wheel lugs and properly torque them, they will never come loose. If you don’t intend on removing the spacers after installation, then use Red Loctite.

What is the torque for wheel spacers on a Mustang?

The recommended torque spec of 2023 Ford Mustang wheel spacers would be 103.5 Ft-tb (140NM) for aluminum wheels.

Can you over tighten wheel spacers?

Over-torquing or under-torquing can be very dangerous. After setting the torque wrench to the correct specification, tighten the wheel bolts in a star pattern, smoothly applying force until the wrench clicks, but no further.