The torque specification for lug nuts on a Honda Crosstour is 80 ft-lbs [[3]]. It is important to follow this torque specification to ensure proper tightening of the lug nuts and to avoid any damage to the vehicle’s components. Over-torquing the lug nuts can result in warping the rotors and other expensive issues. It is recommended to use a torque wrench to achieve the correct torque setting.
Contents
- How much torque do I need in an impact wrench?
- How many pounds of torque do I need to remove lug nuts?
- What is the torque spec on Honda lug nuts?
- Where can I find torque specs for my car?
- Should you always torque lug nuts?
- What is the torque on the lug nuts on a 2012 Honda Crosstour?
- How much torque do you need for Honda Accord lug nuts?
- What is the torque on Honda Fit lug nuts?
- What are the torque specs for lug nuts?
- What is the torque on the lug nuts on a 2017 Honda Accord?
How much torque do I need in an impact wrench?
For most automotive applications, an impact wrench with a torque of around 100 to 500 foot-pounds should suffice. However, you may need a tool with higher torque for heavy-duty tasks like removing rusted axle nuts.
How many pounds of torque do I need to remove lug nuts?
The required torque can vary depending on the vehicle make and model, as specified in the manufacturer’s recommendations. Common torque values for lug nuts typically range from 80 ft-lb to 140 ft-lb or more.
What is the torque spec on Honda lug nuts?
What torque spec are Honda Civic lug nuts? Honda specifies a torque of 108 Nm for the lug nuts on most Civics. This is the optimal tightening force to keep the wheels securely fastened without over-tightening. It’s critical to use a properly calibrated torque wrench when tightening lug nuts.
Where can I find torque specs for my car?
Where To Find The Correct Manufacturer Recommended Torque Specs. The torque specs for the axle nut (and other nuts and bolts) should be listed in the dealership/shop guide provided by the manufacturer. If you can’t find that information, or if you don’t have a guide, you can find the specs in the service manual.
Should you always torque lug nuts?
Every time wheels are replaced, or routine tire maintenance is performed, the vehicle’s lug nuts must be torqued accurately –- when the new tires leave the shop, again at 25 miles, and at 50 miles. Failure to check and re-check wheel hardware can create a significant safety issue.
What is the torque on the lug nuts on a 2012 Honda Crosstour?
Lug/Wheel Nuts: 80 ft. lbs.
How much torque do you need for Honda Accord lug nuts?
The wheel nut torque is 108 N·m (11.0 kgf·m, 80 lbf·ft). This kit should be installed only if the ambient air temperature is 60°F (15°C) or above.
What is the torque on Honda Fit lug nuts?
In conclusion, knowing the correct lug nut size, socket size, and torque specifications for your Honda Fit is crucial for proper wheel installation and maintenance. Using the factory-recommended 12mm x 1.5 lug nuts, a 19mm socket, and applying 80 ft-lbs (108 N-m) of torque will ensure a secure and safe fitment.
What are the torque specs for lug nuts?
Under- or over-tightening wheel-attaching hardware can be damaging and dangerous.
| Hardware Bolt or Stud Size | Typical Torque Range in Ft/Lbs | Minimum Number of Turns of Hardware Engagement |
|---|---|---|
| 12 x 1.5 mm | 70 – 80 | 6.5 |
| 12 x 1.25 mm | 70 – 80 | 8 |
| 14 x 1.5 mm | 85 – 90 | 7.5 |
| 14 x 1.25 mm | 85 – 90 | 9 |
What is the torque on the lug nuts on a 2017 Honda Accord?
The thread type of the Honda Accord lug nuts is M12×1.5, which means the required torque is nearly 120-130 Nm.
