What is the torque on a Dodge Ram brake caliper bolt?

The torque specifications for the brake caliper bolts on a Dodge Ram can vary depending on the specific model and year. However, here are some torque specifications that are commonly mentioned in the search results:
– For the front caliper mounting bolts, the torque specification is 130 ft/lbs.
– For the rear caliper mounting bolts, the torque specification is 120 ft/lbs.
Please note that these torque specifications are general guidelines and it’s always recommended to consult the vehicle’s owner manual or reach out to a certified mechanic for the specific torque specifications for your Dodge Ram model and year.
I hope this helps! Let me know if you have any other questions.

How tight do brake caliper bolts need to be?

The caliper retaining bolts are the big ones that hold the main body of the caliper to the hub assembly. They are quite big, often 15–19mm bolts and take a fair effort to crack them off. These require tightening to 80 plus lbs ft or in general, as tight as you can get them with a 1/2 inch socket set ratchet.

Should you put anti seize on caliper bolts?

No anti-seize required. The steel caliper bolts screws into the aluminum carrier. Anytime you mate steel and aluminum, you should use anti-seize to prevent corrosion and galling the threads.

What is the torque for disc brake caliper mount?

required position and then tighten the two caliper fixing bolts alternately by small amounts each time. Tightening torque: 6 – 8 N·m {53 – 69 in. lbs.} or three clicks.

Should you torque brake calipers?

Do brake caliper bolts need to be torqued? It would be a good idea – calipers serve a very important function and you don’t want them coming loose. That said I have done many of them (in the past) without a torque wrench but not anymore.

What is the torque on a 2005 Dodge Ram brake caliper?

On the 2005 Dodge RAM 3500 Truck, 2WD, the caliper slide pin bolts are to be torqued to 24 ft. lbs.

What is the torque on the caliper bolts on a 2004 Dodge Ram 2500?

Front Caliper and Bracket:
Install the caliper slide pin bolts tighten to 24 ft. lbs. Install the caliper bracket mounting bolts and tighten to 130 ft. lbs..

What is the torque on a Dodge Ram brake caliper?

The torque specifications for the light-duty package are 130 ft./lbs. for the front caliper brackets and 120 ft./lbs. for the rear caliper brackets. The heavy-duty front brake caliper bracket has a torque specification of 275 ft./lbs.

Do brake calipers need a torque wrench?

The caliper bolts or the lug nuts? In any event the answer is “yes” provided you tighten them down enough so they will not work loose and your mechanic is only a couple of miles away. Originally Answered: What size torque wrench do I need for brakes?

What is the torque spec for brake caliper bolts?

Brake caliper bracket bolts connect the caliper bracket to the spindle or knuckle, never seen one with any kind of sleeve. Usually torqued to 80+ ft lbs, big bolts that usually use a 20+mm or 5/8 or larger socket.

How much torque for caliper bracket Ram 1500?

The heavy-duty front brake caliper bracket has a torque specification of 275 ft/lbs.