What is the temperature of the thermostat on a Toyota FJ Cruiser?

The thermostat in a Toyota FJ Cruiser plays a crucial role in regulating the engine’s temperature. A malfunctioning thermostat can lead to various issues and should be addressed promptly. Some common symptoms of a bad thermostat include no heat, a spiked temperature gauge, a blown head gasket, and more.
The thermostat in a Toyota FJ Cruiser is designed to open and close based on the engine’s temperature. When the engine is cold, the thermostat remains closed to block coolant flow to the radiator, allowing the engine to warm up faster. Once the engine reaches its operating temperature, usually around 195 degrees Fahrenheit, the thermostat opens and closes as you drive to maintain a coolant temperature typically between 195 and 220 degrees Fahrenheit.
If the thermostat in a Toyota FJ Cruiser is stuck open, it can cause the engine to run at a cooler temperature than it should, resulting in increased fuel consumption. In such cases, the P0128 OBD-II trouble code may be triggered, indicating that the thermostat is stuck open.
To fix the issue, a new thermostat may need to be installed. It is recommended to consult a professional mechanic for thermostat replacement. Genuine Toyota OEM thermostats and aftermarket options are available for purchase.
Please note that the specific temperature at which the thermostat fully opens is not mentioned in the search results.

What is the operating temperature of the FJ Cruiser?

Most FJ’s seem to run a 185 deg coolant temperature, at least according to the OBD2 Port.

How do I know if my lower thermostat is bad?

Test the Continuity of the Lower Thermostat
This process is similar to checking the continuity of the upper thermostat. Place your leads on the two terminals. If the reading is 0 ohms or close to it, the water temperature is lower than it should be.

Will a car run hotter without a thermostat?

Yes, your car can overheat even without a thermostat. The thermostat allows the engine to come up to normal operating temperature faster by shutting off or restricting the flow of coolent in the engine. When your engine is up to operating temperature, the thermostat is completely open.

What is the function of the thermostat?

The primary function of a thermostat is to maintain a minimum operating temperature in the car’s engine. When the engine is started, the antifreeze and coolant mixture is kept within the engine by the thermostat. It opens upon reaching a specified temperature.

What is the low temperature thermostat on a car?

Low Temperature Thermostats
With a low temperature thermostat the coolant is released to flow more freely. This helps delay or even prevent high temperature spikes when the engine is under higher loads. Can be used to reduce the risk of overheating or poor performance as a result of high engine temperatures.

What is the common problem of FJ Cruiser?

Depending on the model year, the Toyota FJ Cruiser commonly develops drivetrain problems like vibration and loud road noise. Other common issues for the Toyota FJ Cruiser include a shaky steering wheel, loose foot rest pedal, bad driveshaft, and shuddering engine.

Is 230 degrees to hot for an engine?

Depends on the engine and the reason the temp is that high, but in general, 230 degrees is an acceptable oil or coolant temperature. Many engines run at around 230 degrees during normal operation and most engines will tolerate 230 degrees no problem.

Is a 160 or 180 thermostat better?

A 180-degree thermostat is better for engine efficiency—aka better fuel mileage and decreased emissions. A 160-degree thermostat is designed to maintain a lower engine operating temperature, which tends to make a little bit more horsepower and torque.

What temp thermostat should I get for my car?

Most experts agree that your engine should run between 195 degrees and 220 degrees. In ideal situations, your needle will maintain a posture right in the middle of your gauge.

What is the normal engine temperature for a Toyota?

It should be around 185-190F. Buying OEM, it usually comes with a gasket. You’ll need to drain the coolant, so it’s a good time for a flush.