What is the smart charge system on a Ford Transit Connect?

About the Smart Charge System on a Ford Transit Connect
The smart charge system on a Ford Transit Connect is a feature that offers convenient and efficient charging options for compatible devices, such as smartphones. It allows for wireless inductive phone charging, eliminating the need for struggling with ports, plugs, or charging cables.
The system is part of the advanced suite of driver-assist technologies, which includes features like BLIS with Cross-Traffic Alert, Pre-Collision Assist with Automatic Emergency Braking, Auto High-Beam Headlamps, and Lane-Keeping System. Additionally, the Transit Connect is designed to make additional technology available to help keep the driver in command, from the driveway to the highway.
The smart charge system is designed to provide a seamless and hassle-free charging experience for compatible devices, enhancing convenience and ease of use for the driver and passengers.

How many miles can transit connect last?

What is Ford Transit Connect lifespan? The estimated lifespan of a Ford Transit Connect is 157,000mi, before reaching the life expectancy upper limit. Fuel type is a major factor when looking into a vehicles lifespan/life expectancy.

What is the benefit of a smart alternator?

The smart alternator system allows the vehicle to control the output voltage from the alternator based on vehicle operating conditions to reduce electrical load and in turn mechanical load on the engine by the alternator, this renders it unsuccessful at charging a secondary battery system to a usable level.

What is the difference between a smart alternator and a regular alternator?

Variable voltage: Unlike a traditional vehicle alternator, which supplies the battery with a constant voltage of between 13.8v – 14.4v when the engine is running, a smart alternator voltage is variable. Reduced voltage: The smart alternator reduces the voltage supplied to the battery when you are driving.

How does the Ford smart charging system work?

Smart charging decreases alternator output during vehicle acceleration and increases output during vehicle braking or deceleration. It also communicates with the aggressive deceleration fuel shutoff (ADFSO) system to ensure the battery is being adequately charged.

Can a smart alternator be turned off?

Can you turn a smart alternator off? It’s possible to remove the smart charge capability, but retain the self-excite functionality. To do this, you would need to disconnect the wires that run to the PCM.

What is the benefit of the connected capability of the Ford connect to charge station?

The Ford Connected Charge Station charges up to 10X faster than a standard wall outlet. You can even control access to the charge station, share with others and schedule charge times with available intelligent features.

What controls a Ford Smart charge alternator?

Typically, the Engine Control Module (ECM) controls charging and can vary the charge rate dependent on a number of factors, such as ambient temperature (or battery ambient temperature), accelerator pedal position, electrical loading, and engine speed etc.

How do I know if my van has a smart alternator?

During the drive, have the other person monitor the meter. Should the voltage go up and down between around 12-15V then the vehicle has a smart alternator and you will need to use a DC-DC charger. If it stays steady & consistent at about 14V or so then you will have a fixed voltage alternator and be able to use a VSR.

What is the smart charge on transit connect?

The theory behind smart charge, is a battery will take a charge at its most efficient when it’s cold. Following start up, the PCM checks the Engine coolant temp, and intake air temp, and calculates a cold engine. It will then boost the battery charge, pulling it back as it calculates the under bonnet temp coming up.

What is the meaning of smart charge?

Smart charging refers to a charging system where electric vehicles, charging stations and charging operators share data connections. Through smart charging, the charging stations may monitor, manage, and restrict the use of charging devices to optimize energy consumption.