Based on the search results, the rear differential ratio for a 2008 Ford Ranger can vary depending on the specific model and configuration. Here are some relevant snippets:
– The axle tag on the rear differential cover can provide information about the gear ratio and axle diameter. For example, a 7.5-inch axle with 3.73 gears.
– The Federal Compliance Sticker in the door jamb can also be used to identify the axle.
– The rear differential ratio can be found on the Safety Standard Certification label attached to the left driver’s side door lock post.
It’s important to note that the rear differential ratio can vary depending on the specific trim level and options chosen for the vehicle. To get the most accurate information for a particular 2008 Ford Ranger, it is recommended to refer to the vehicle’s documentation or consult with a Ford dealership or authorized service center.
Contents
- What kind of rear differential fluid does a 2006 Ford Ranger take?
- What kind of rear differential fluid does a Ford Ranger take?
- Why is the Ford 8.8 so good?
- What kind of differential fluid does a 2009 Ford Ranger take?
- What Fords have 8.8 rear end?
- How can I find my rear axle ratio?
- What is the difference between a Ford 8.8 and 9-inch rear end?
- How do I find my Ford axle ratio?
- How do I identify the 8.8 Ford rear end?
- What is the axle ratio for the Ford Ranger?
What kind of rear differential fluid does a 2006 Ford Ranger take?
Ford Ranger FX4 / Sport / STX / XL / XLT 2006, SAE 80W-90 Premium Rear Axle Lubricant by Motorcraft®.
What kind of rear differential fluid does a Ford Ranger take?
SAE 80W-90 Premium Rear Axle Lubricant (XY80W90QL) by Motorcraft®. Location: Rear. Viscosity: SAE 80W-90.
Why is the Ford 8.8 so good?
The original Fox-body 8.8 used from ’86-’93 can be easily upgraded with better axles, a stronger limited slip with more clutches, and bigger axle bearings to become a very durable yet light rearend assembly. And the best part is you won’t spend a ton of money to get there.
What kind of differential fluid does a 2009 Ford Ranger take?
Ford Ranger 2009, SAE 80W-90 API GL-5 Limited Slip Differential Fluid by Sta-Lube®.
What Fords have 8.8 rear end?
Common Applications
- 1986-2014 Ford Mustang.
- 1982-2012 Ford F-150.
- 1982-1996 Ford Bronco.
- 2001-2005 Ford Explorer Sport Trac.
- 1991-2011 Ford Ranger 4.0L models.
- 1991-2001 Ford Explorer (Solid axle)
- 1985-2011 Ford Panther platform vehicles.
How can I find my rear axle ratio?
Spin the tire one full revolution or 360 degrees. Count the number of times the driveshaft spins. If the drive shaft spins 3 1/2 times and the tire spins once you have an approximate rear end ratio or final drive ratio of 3.5 to 1. If it spins 4 1/4 times you have and an approximate ratio of 4.25 to one and so on.
What is the difference between a Ford 8.8 and 9-inch rear end?
The Ford 8.8 Rear Axle Is Cheaper Than a 9-Inch
11) The 8.8 is cheaper than a 9-inch, and if you add 31-spline axles, it can be as strong as a GM 12-bolt. The pinion-gear shaft diameter is larger than on a 9-inch and the same size as on a Chevy 12-bolt. 12) Ranger and Explorer axles have a 5-on-412-inch bolt pattern.
How do I find my Ford axle ratio?
To find the axle code:
- View the Safety Compliance Certification Label on the driver’s side, front or rear door panel.
- Find the word “AXLE” under the bar code.
- Find the two-digit code under “AXLE.”
How do I identify the 8.8 Ford rear end?
You can identify the Ford 8.8-inch rear by its rear cover. It has a thin metal or plastic 10-bolt cover, and the bolts are 7/16-inch thread. The cover is not quite square, measuring about 101/2 inches high by 11 inches long. The 8.8-inch pinion shaft is 15/8 inches and has 30 splines.
What is the axle ratio for the Ford Ranger?
Ford 7.5 & 8.8 Inch Axle Tag & Door Codes
| Ranger | ||
|---|---|---|
| Code | Description | Ratio |
| R5 | L/S 8.8″ | 3.55 |
| R6 | L/S 8.8″ | 3.73 |
| R7 | L/S 8.8″ | 4.10 |
