What is the rear axle rating on a Toyota Tundra?

Rear Axle Rating on Toyota Tundra
The rear axle rating on a Toyota Tundra varies depending on the specific model and configuration. For example, a 2012 Tundra SR5, 4×4, 5.7-liter, double cab, standard bed has a Gross Axle Weight Rating (GAWR) of 4,150 lbs for the rear axle.
The 2021 Toyota Tundra offers a tow package that includes an upgraded rear axle gear ratio of 4.3:1, which enhances its towing capabilities for extremely heavy loads.
It’s important to note that the rear axle rating can be affected by factors such as the specific model year, trim level, and any additional towing packages or modifications.
If you have a specific model or configuration in mind, it’s recommended to refer to the official specifications provided by Toyota for the most accurate and up-to-date information regarding the rear axle rating.

How do I know my axle capacity?

And the 6000 you’re only going to have six lugs. So that’ll be able to get you down to at least the size that you need if you have a seven thousand.

What is rear axle capacity?

The GAWR, front or rear, is the maximum amount of weight that can be carried on a single axle. This weight includes the vehicle, passenger(s), cargo and fluids (fuel, oil, etc.). For the rear axle this may include the tongue weight of a trailer if one is connected.

What is the axle rating?

What makes up the axle rating? The axle rating limit includes the weight of the trailer and all of the trailer’s cargo. Oftentimes, people forget to factor in the total weight of the trailer when empty before loading it with cargo. For example, a trailer that has two 3,500 lb axles has an axle rating of 7,000 pounds.

What is the axle ratio of a Toyota Tundra?

With the Double Cab, 4×4 drivetrain, its 7,265-pound GVWR, the same 145.7-inch wheelbase, and the same 3.31 rear axle ratio, its maximum towing capacity is an equally astounding 8,300 pounds when properly equipped.

What is the best rear axle ratio for a truck?

The higher the ratio, the more revolutions per minute. Towing: For pickup trucks released after 2010, the best axle ratio for towing falls somewhere between 3.55 and 3.73. This range provides good acceleration for V8 gas and diesel engines.

What is the load rating of a Toyota Tundra?

You can feel free to load up the standard 6.5-ft. truck bed of this automobile, because its base trim is able to sustain a 1,940-lb. maximum payload rating1.

What is the max load on a Toyota Tundra?

Paired with a 10-speed automatic transmission, the Tundra delivers a smooth and powerful ride. The 2023 Tundra also has impressive payload, with a 1,940-pound payload capacity.

What is the rear axle ratio of a Toyota Tundra?

But…the listed rear end ratio of all of the Tundra’s I have seen is 3.31.

What is the weight rating for axles?

“Gross axle weight rating” or “GAWR” means the value specified by the manufacturer as the load-carrying capacity of a single axle system, as measured at the tire-ground interfaces. “Gross vehicle weight rating” or “GVWR” means the value specified by the manufacturer as the loaded weight of a single vehicle.

How much weight can you put in the back of a Toyota Tundra?

Tundra’s aluminum-reinforced bed is composed of an ultra-durable Sheet-Molded Composite (SMC) surface. This strong and resilient bed boasts greater impact strength than aluminum and acts as a shield against dents, impact dings and rust with a maximum payload capacity of up to 1,940 pounds.