Part Number of the Oxygen Sensor for Toyota Avanza
The part number of the oxygen sensor for a Toyota Avanza is 89465-BZ040. This sensor is designed to detect the amount of oxygen being expelled via the exhaust stream, allowing the engine to deliver the correct proportion of fuel for efficient operation.
If you have any further questions or need additional information, feel free to ask!
Contents
- Are oxygen sensor 1 and 2 the same?
- What are the numbers on O2 sensor?
- Do oxygen sensors have part numbers?
- How many oxygen sensors does a Toyota have?
- Do I have to replace all 4 O2 sensors?
- What is the part number for the oxygen sensor on a Toyota Corolla?
- Are all Toyota oxygen sensors the same?
- How do I find my oxygen sensor part number?
- How to tell if you have a bad catalytic converter or O2 sensor?
- How can I tell which O2 sensor is bad?
Are oxygen sensor 1 and 2 the same?
What is Sensor 1 & 2? The sensor number is telling us where on the exhaust system the O2 sensor or Exhaust temperature sensor is mounted. The 1st sensor is located closest to the engine and the last is located at the rear of the exhaust system.
What are the numbers on O2 sensor?
However, there are general voltage ranges that O2 sensors typically produce. A properly functioning oxygen sensor will show a rapidly fluctuating output voltage between approximately 0.1 and 1.0 volts. When the air-fuel mixture is perfect, the O2 voltage value will be exactly 0.45V.
Do oxygen sensors have part numbers?
Looks like there’s two different part numbers, one for the upstream sensors and one for the downstream ones, likely the only difference being the length of the wire attached to each.
How many oxygen sensors does a Toyota have?
Your exhaust system has up to four oxygen sensors depending on the engine size and exhaust layout. If one fails, your ECU will not receive accurate information on your engine’s emissions and may end up reducing your engine’s performance. Read more about oxygen sensors and how they work here.
Do I have to replace all 4 O2 sensors?
Manufacturers recommend replacing O2 sensors in pairs (both Upstream or both Downstream).
What is the part number for the oxygen sensor on a Toyota Corolla?
Toyota Corolla XLi FZ Oxygen Sensor O2 – 89465-52380.
Are all Toyota oxygen sensors the same?
They have the same number of wires. They look the same. But they operate. Completely different which takes us to air fuel ratio sensors. People are often confused by them.
How do I find my oxygen sensor part number?
The OEM part number can be found directly on the part itself. You can also call a dealership with your VIN, and they will provide you with the OEM part number. You can give one of our car specialists a call at 1-888-907-7225 for further assistance in purchasing your oxygen sensor.
How to tell if you have a bad catalytic converter or O2 sensor?
To check if it’s a clogged cat versus a bad oxygen sensor (when you don’t have a check engine light), grab a vacuum gauge. Connect the gauge to an intake manifold vacuum line. Start the engine, let it idle, and check the reading on the gauge.
How can I tell which O2 sensor is bad?
A decrease in fuel efficiency can be a telltale sign that an O2 sensor is not performing as it should. This can happen because of a fuel mixture that is either too lean or too rich. Such a swing in A/F ratio is a sign that an upstream or control sensor is faulty.
