AHG Auto Service » Make » Ford » What is the part number of the cooling fan relay on a Ford Fiesta?

What is the part number of the cooling fan relay on a Ford Fiesta?

Based on the search results, I couldn’t find a specific part number for the cooling fan relay on a Ford Fiesta. However, I found some information that might be helpful.
According to a forum post on the Ford Fiesta ST Forum, a user mentioned a part number 1820582 for a cooling fan relay that they believe is the correct part for their issue. It’s important to note that this information is from a forum post and may not be verified.
Additionally, in a customer review on a website, it is mentioned that the cooling fan relay is responsible for supplying power to the cooling fan when the powertrain control module sends a signal. However, the specific part number is not mentioned in this source.
In another source, it is mentioned that there was a customer satisfaction program (16B11) for certain 2016 Ford Fiesta models, which involved the replacement of the high-speed cooling fan relay. However, the specific part number is not provided.
To get the most accurate and up-to-date information on the part number of the cooling fan relay for your Ford Fiesta, I recommend contacting a Ford dealership or an authorized Ford parts retailer. They will be able to provide you with the correct part number based on your specific vehicle model and year.
Please note that the information provided is based on the search results and may not be exhaustive or fully accurate. It’s always best to consult with a professional or refer to the official documentation for the most accurate information.

Can a cooling fan relay go bad?

Cooling Fan Failure
This causes an arc, and eventually the relay contacts deteriorate due to this constant arcing at fan switch off.

How do you know if your radiator fan switch is bad?

The best way to tell if your cooling switch is faulty is to listen to your engine while you drive. You know how your engine is supposed to sound, and if you notice that you don’t hear the fan as often as you normally do during your afternoon commute, you might have a failing switch.

Is there a fuse for the radiator fan?

The fan uses a big fuse with a capacity of 50A, but sometimes the fan control module has another small fuse. If the fan’s fuse is faulty, you may have a problem with the wiring or the radiator fan itself.

What sensor turns on the radiator fan?

Yes, the coolant temperature sensor is an important component in controlling the radiator fan in many modern vehicles. The coolant temperature sensor monitors the temperature of the engine coolant and sends this information to the engine control module (ECM), which uses it to determine when to turn on the radiator fan.

What relay controls the cooling fan?

Usually, there are three fan relays in the car – one low-speed relay and two high-speed relays. These relays are live under the hood of your car, very often near the accumulator. On your relay box, they will be signed as Rad Fan 1, Rad Fan 2, and Rad Fan 3 respectively.

How do I know if my radiator fan relay is bad?

If the cooling fan relay has failed, you may see warnings, such as the check engine light and the temperature warning light, pop up on the dash, but first, you may notice that the A/C stops cooling. More about that in the next paragraph. The check engine light illuminating may indicate a faulty cooling fan relay.

Where is the cooling fan relay located?

So usually grab those with your hands really tight. Okay we go there and pull it out okay. Sometimes you might have to use something to pry them out with. This is the relay.

Do I need a relay for radiator fan?

While you could just wire the electric fan to run all the time, hooking it up with an electric fan relay kit that is temperature controlled—or to use the fancy term for it, thermostatically controlled—is a much better idea.

Does the coolant temperature sensor turn the fan on?

Yes, the coolant temperature sensor is an important component in controlling the radiator fan in many modern vehicles. The coolant temperature sensor monitors the temperature of the engine coolant and sends this information to the engine control module (ECM), which uses it to determine when to turn on the radiator fan.

Where is the cooling fan temperature sensor located?

The ECT sensor is typically near the thermostat in the cylinder head or thermostat housing. The ECT sensor is typically near the thermostat in the cylinder head or thermostat housing. Many vehicles also have a second ECT sensor on a different part of the engine or radiator.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment