What is the parking brake warning on a Subaru Outback?

Parking Brake Warning on a Subaru Outback
The parking brake warning on a Subaru Outback is a feature that alerts the driver when the parking brake is engaged or if there is a malfunction in the electronic parking brake system. Here’s what you need to know:
– When the parking brake is applied while the ignition switch is in the ON position, the brake system warning light and the indicator light on the parking brake switch illuminate.
– If the brake system warning light flashes, it indicates that the electronic parking brake system may be malfunctioning. In such cases, it is important to immediately stop the vehicle in a safe location, use tire stops under the tires to prevent the vehicle from moving, and contact your Subaru dealer.
– The parking brake warning light can also stay on if the parking brake is not fully disengaged. Some drivers may forget to completely disengage the parking brake or only partially disengage it, triggering the warning light. In such cases, fully disengaging the parking brake should turn off the warning light.
– The parking brake warning light is a multifunctional indicator that also turns on when the parking brake handle is pulled to warn the driver that the brake is engaged when starting the car.
To turn off the parking brake on a Subaru Outback, follow these steps:
1. Locate the electronic parking brake switch, which is usually above and to the left of the gear shift knob.
2. While pressing and holding down the brake pedal, press the parking brake switch down to turn off the electronic parking brake.
Remember to always ensure that the parking brake has been fully released before starting to drive.
Please note that the information provided here is based on the search results and may not cover all possible scenarios or specific model years. It is always recommended to consult the vehicle’s owner’s manual or contact a Subaru dealer for accurate and up-to-date information.
I hope this helps! Let me know if you have any other questions.

What causes electric parking brake problem?

Wiring issues or loose connections Since your electric parking brake isn’t mechanical (only the servo motor and brake pads physically move), the odds are high the issue is primarily electronic. You may have a blown fuse, a loose connection between two wires, or a wire that was chewed through by an ambitious squirrel.

What is the problem with the electronic parking brake on a Subaru Outback?

Description of the WTV-81 Safety Recall:
The Electronic Parking Brake (or EPB) Actuator recall is due to a manufacturer defect in a component of a circuit board in the control unit of the EPB. The actuator stroke sensor magnetic ring within a capcitor of the ciruit board can become cracked.

What is the brake system warning light on a Subaru Outback?

Brake system warning light
1) The parking brake is engaged. 2) The brake system may not be working properly. 3) The brake fluid level is low. If the parking brake is in the OFF position, stop the vehicle as soon as you can safely do so and have it towed to the closest Subaru dealership.

Can I drive my car with the parking brake light on?

It’s best to drive your vehicle as little as possible when the brake warning light comes on and contact a brake specialist to diagnose and repair the issue. If you can’t drive the car to the repair shop, a mobile brake repair service can come to you to diagnose and repair the issue.

Can I drive with brake pad warning light on?

It will usually be safe to drive with the brake pad warning light on for a short period of time. This light will usually be programmed to come on when you still have some brake pad material left. However, you should get the problem looked at by a professional as soon as possible.

Is it OK to drive with EPB light on?

If the parking brake warning light is still on even though the EPB has been released, have the system checked by a professional workshop. Kia recommends to visit an authorised Kia dealer/ service partner. Do not drive your vehicle with the EPB applied. It may cause excessive brake pad and brake rotor wear.

How do you reset the parking brake warning light?

This step is crucial as it initiates while holding down the control observe. The indicator lights on your dashboard. These lights may vary depending. On the make and model of your vehicle. Typically.

What is the electronic parking brake warning light on a Subaru?

Check Parking Brake
Your Subaru car has a sensor that detects if the parking brake is engaged in any way. if that is the case, the sensors trigger the brake light to come on. Fixing this is and by disengaging the brake light, the warning light should immediately go off.

What does it mean when the parking brake warning light comes on?

Parking Brake Light: On the dashboard, the parking brake warning light usually appears as a circled “P” symbol. It lights up when the parking brake isn’t properly released and can also indicate a worn-out parking brake mechanism or a malfunctioning sensor.

Is there a recall on Subaru electronic parking brakes?

Subaru of America, Inc. (Subaru) is recalling certain 2010-2014 Subaru Legacy and Outback vehicles equipped with a manual transmission. The electronic parking brake (EPB) may not engage as intended, allowing the vehicle to rollaway if the transmission is not in the proper gear when parked.