AHG Auto Service » Make » Dodge » What is the oldest Dodge Power Wagon?

What is the oldest Dodge Power Wagon?

Oldest Dodge Power Wagon
The oldest Dodge Power Wagon is the 1946 Dodge WDX Power Wagon, which was the first mass-produced 4×4 truck in the United States. It was introduced in 1945 and production began in 1946. The earliest known surviving Dodge Power Wagon is the 12th built in January of 1946.
The Power Wagon was initially developed as a WDX truck, and it was known by its engineering code T137 until around 1960. It boasted features not often found on earlier 4×4 vehicles, such as part-time 4WD with a 2-speed transfer case, a 4-speed manual transmission, and front & rear power take offs (PTOs).
In terms of model variations, the First Series Power Wagon was in production from late 1945 to late 1945. The model numbers in this series included the 1945 to 1947 WDX, the 1948 to 1949 B-1-PW, and the 1950 B-2-PW.
The Dodge Power Wagon served as a nameplate for the Dodge Ram, the full-size pickup, from 2005 to 2013. It was initially developed as a WDX truck, and until around 1960, it was known by its engineering code T137 – a nickname that is still used to address the Power Wagon by car enthusiasts.
In summary, the 1946 Dodge WDX Power Wagon is the oldest Dodge Power Wagon, and it played a significant role as the first mass-produced 4×4 truck in the United States [[7]].

What is so special about the Ram Power Wagon?

The Power Wagon is the Ram 2500’s off-road-focused trim, built to thunder down rocky slopes without losing its cool. It comes solely with a crew cab you can configure to seat five or six passengers. All Power Wagons have a 6-foot-4-inch cargo box. This Ram has amenities that help it shine off-road.

How much horsepower does a 1948 Power Wagon have?

Despite its rugged looks and military reputation, this Power Wagon is quite underpowered by modern standards. Our example runs Chrysler’s tried-and-true 230ci flathead inline 6, making approximately 74 horsepower from the factory. This isn’t a fast truck, but it wasn’t designed to be.

What year did Dodge release the Power Wagon?

The result, though, was not called Power Wagon: Initially, it was called the Model WDX General Purpose Truck on its January 1946 launch. The decision to name it Power Wagon came a few months later, and was announced in the noted truck journal Power Wagon.

What were the specs of the 1953 Power Wagon?

It had a 126 inch up to a 147″ wheelbase chassis and featured the 230 cubic-inch flathead inline-six engine, a 4-speed manual transmission, a two-speed 1.96-1 ratio low range transfer case for part time 4-wheel drive with a power take off, or PTO which would send power front or rear for operating auxiliary equipment, …

What engine did the 1949 Power Wagon have in it?

Gallery: 1949 Dodge Power Wagon Resto Mod
A 5.9-liter Cummins turbo diesel is under the hood, conservatively tuned to develop 350 horsepower (261 kilowatts) and 600 pound-feet (813 Newton-meters) of torque.

How many Power Wagons were made?

Dodge produced 95,145 Power Wagons through 1968, by which time the starting tab for a pickup had nearly tripled to $4,634. The peak year was 1957, when 8,706 were turned out, but other years saw anywhere from about 1,400 to 6,000 produced.

How many miles per gallon does a 1949 Power Wagon get?

“But you can forget about towing, and the fuel economy drops to 10–11 mpg.” Both engines connect perfectly to Dana 60 front and Dana 80 rear differentials, with ARB airlockers and a 4.56 gearset. Originally built for the military, early flat-fender Power Wagons were the first mass produced 4X4 pickup.

What was the first Dodge Power Wagon?

Mechanically derived from Dodge’s 1942–1945 3/4-ton WC series military trucks, the Power Wagon was introduced in 1946 as the first civilian production 4×4 truck.

What engine is in a 1948 Dodge Power Wagon?

Also available on any configuration was a front-mounted winch. The few changes over the years were mostly mechanical and in subtle details. The greatest change was in 1961, when the stalwart 230 cubic inch flathead six gave way to the 251 cubic inch flathead six that was formerly used in medium-duty trucks.

What years were power wagons made?

The Dodge Power Wagon was a four wheel drive light truck that was produced in various model series from 1945 to 1981 by Dodge. It was also produced as a nameplate for the Dodge Ram from 2005 to 2013, and, most recently, as an individual model marketed by Ram Trucks.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment