What is the maintenance required light on a Toyota RAV4?

The maintenance required light on a Toyota RAV4 is an informative message that appears on the dashboard and infotainment center of the vehicle. It is not an alarming warning like the Check Engine Light, but rather a reminder that regular maintenance is due.
The maintenance required light typically indicates that the RAV4 is due for routine maintenance, such as an oil change . It is usually triggered by specific mileage intervals or time-based reminders. It is important to follow the recommended maintenance schedule outlined in the owner’s manual to ensure the vehicle’s optimal performance.
To reset the maintenance required light on a Toyota RAV4, you can follow these general steps:
1. Start with the vehicle turned off.
2. Press and hold the trip meter reset button.
3. While holding the button, turn the ignition switch to the “ON” position (do not start the engine).
4. Continue holding the button until the maintenance light turns off. This may take a few seconds.
5. Release the button.
If the maintenance light remains on after resetting it or if you have any questions, it is recommended to consult the owner’s manual or contact a certified Toyota service center for assistance .
Remember, the maintenance required light is not an indication of a serious problem, but rather a reminder for routine maintenance. It is important to address it in a timely manner to ensure the longevity and performance of your Toyota RAV4 .
I hope this helps! Let me know if you have any other questions.

Can I drive with maintenance required light on?

While you can still drive your car with this light on, you should have it checked.

Does maintenance required mean on a car?

What ‘MAINT REQD’ Means. The ‘MAINT REQD’ light comes on every 5000 miles from the last time it was reset. It in no way indicates any system malfunction; it is simply a mileage counter intended to remind the user that an oil change is necessary.

What does maintenance required mean Toyota?

So put your key in the ignition. And turn it to the run position. You can see here we have the trip mileage up. So hit the odometer button and switch that to total mileage. Okay.

Does maintenance required only mean oil change?

Depending on the vehicle’s mileage, this could mean that an oil change, fluid check, tire rotation, or multi-point inspection is needed. In some cases, it may also be necessary to replace the wiper blades or cabin air filter.

How long can you go after your car says maintenance required?

In general, a flashing oil light will turn into a serious problem after around 2 weeks or 500 miles of driving. However, once it reaches that stage, things can quickly deteriorate, resulting in catastrophic mechanical damage. As a result, schedule an appointment with a mechanic as soon as possible.

How do I clear my maintenance required?

Quick and Easy Steps to Reset the Maintenance Required Light

1. 1 Turn your car on, but do not start the engine.
2. 2 Change the dashboard display to “TRIP A.”
3. 3 Switch your car off and hold the “ODO/TRIP” button down.
4. 4 Start your car, but don’t turn on the engine.
5. 5 Hold the “ODO/TRIP” button down for 10 seconds.

How do you reset the maintenance light on a Toyota RAV4?

Button scroll down here to schedule maintenance push and hold that do you want to reset. Data if you do hit yes I’m not going to reset it.

What is the difference between maintenance required and check engine light Toyota?

It’s important not to confuse the check engine light with the Toyota maintenance light, as they are different. While the Toyota maintenance light appears every 5,000 miles, the check engine light can come on for various reasons since it’s programmed to detect when your engine or fuel system isn’t performing optimally.

Why does my Toyota RAV4 says maintenance required?

The Toyota maintenance light automatically turns on every 5,000 miles as a signal that it’s time to check your engine oil and other routine services. Since this indicator is tied to your odometer, learning how to reset the Toyota maintenance required light keeps you on a proper maintenance schedule.

How do I turn off maintenance required light on Toyota?

Put your key in the ignition and turn it to position one, the position just before starting the car. Push and hold the trip meter reset button on the dashboard, then turn your key to position two. Continue holding the odometer button for 10 seconds. The light should then flash, possibly beep, and then go out.