What is the lightning bolt symbol on a Dodge Charger?

The lightning bolt symbol on a Dodge Charger’s instrument panel is an indicator for the electronic throttle control (ETC) system. The ETC system regulates engine idle speed, traction control, and cruise control. If the lightning bolt symbol illuminates and stays lit while the engine is running, it indicates a problem with the ETC system [[5]].
The gas pedal in a Dodge Charger is not mechanically connected to the engine. Instead, a sensor monitors the position of the pedal, and that information is sent to the ETC system to make changes in engine speed. If the system detects a problem that results in an ETC error, the lightning bolt symbol illuminates on the dashboard.
If the lightning bolt symbol stays on after the initial lamp check at start-up or illuminates while driving, but the Charger drives normally, it is recommended to continue driving but make a note to have it checked. If it is safe to do so, you can stop the car, put it in “Park,” and turn off the engine. Restart the car and see if the light comes back on. It is also advised to have the car scanned for trouble codes.
Please note that the information provided is based on the search results and may not cover all possible scenarios. It is always recommended to consult the vehicle’s owner’s manual or seek assistance from a professional mechanic for a more accurate diagnosis and resolution of any issues with the ETC system in a Dodge Charger.

What is the lightning bolt symbol on my dashboard?

A lightning bolt symbol between two curved lines illuminates to warn you about a problem with your electronic throttle control. A red lightning bolt inside a circle with bent lines on either side represents a problem with your electric parking brake.

What causes throttle control failure?

Most often it is a question of the dirty throttle body, which is therefore deprived of its function. Dirt derives from the fact that, being an engine component, substances such as oil or vapor residues can be deposited. If the problem therefore comes from simple maintenance, cleaning is sufficient.

How much does it cost to fix an electronic throttle control on a Dodge Charger?

The average cost for a Dodge Charger Throttle Body Replacement is between $500 and $509. Labor costs are estimated between $35 and $44 while parts are typically priced around $464. This range does not include taxes and fees, and does not factor in your unique location.

Can I drive with the throttle control warning light on?

Can I drive with the throttle control light on? Yes, usually, but you should go straight to a repair shop. There can be many different causes for the throttle control warning light, so a proper diagnosis is key.

What does ⚡ mean on my car?

A battery symbol with a lightning bolt means the battery’s charge level is low (this may also appear in plug-in hybrid vehicles) and a battery symbol with a temperature gauge means the battery is running hot, and the car should be pulled over and shut off as soon as it is safe to do so.

What causes the throttle light to come on?

ETCs control an internal combustion engine’s power by regulating how much fuel and air are let into the engine. When this system is disrupted, a vehicle’s electronic throttle control light will start to flash, indicating a problem with the engine’s fuel and air intake.

What causes throttle body to go bad?

One of the main causes of a malfunctioning throttle body is internal contamination. Due to the contamination accumulated in the throttle body, the throttle valve can no longer move properly, causing problems with the control of the air supply.

What does the lightning bolt mean on Dodge Charger?

The Red lightning bolt of death means the car’s computer thinks there is no communication between the gas pedal and the throttle bottle. It is called an Electronic Throttle Control, or ETC for short. First try to reset the throttle sensor here is the instructions.

How to fix Dodge Charger electronic throttle control warning light?

First, check all of the sensors and wiring to make sure they are all connected and in good condition. Next, try resetting the system by disconnecting the battery for a few minutes. Finally, if those two things don’t work, you may need to replace the electronic throttle control unit itself.

What causes an electronic throttle control to go bad?

When the ETC light turns on the car dashboard, it means that one of the parts in the throttle control system is malfunctioning such as a bad throttle position sensor, a stuck throttle valve, or a problem with the wiring or connections in the system.