Hub Bore Size of a 2000 Toyota 4Runner
The hub bore size of a 2000 Toyota 4Runner is 106.1 mm. This is the measurement of the machined opening on the back of the wheel that centers the wheel properly on the hub of the Toyota 4Runner.
Contents
- What is the hub bore of a 5th generation 4Runner?
- What size are stock Toyota 4Runner wheels?
- How do I know my center bore size?
- Do Tacomas and 4Runners have the same wheels?
- How do I know my hub bore size?
- What size are the OEM wheels on a 2000 Toyota 4Runner?
- What is the bolt pattern on a 1999 Toyota 4Runner?
- Does hub bore size have to be exact?
- What is the center bore of a 4Runner?
- What is the hub center bore size?
What is the hub bore of a 5th generation 4Runner?
The 5th generation 4Runner has a centre bore of 106.1mm, thus make sure the wheels you purchase have a centre bore of 106.1mm or greater, but no larger than 106.25mm. If the centre bore is more than 106.25mm, hub-centric rings will be required to assure correct fitting.
What size are stock Toyota 4Runner wheels?
17”
Most Toyota 4Runners come stock with 17” rims, although Limited trims levels come with 20” rims.
How do I know my center bore size?
To measure your centre bore and choose the right hub-centric rings, follow these steps: Find the centre bore on your vehicle’s wheels. It’s the circular opening in the middle of the wheel that fits over the hub on your vehicle’s axle. Measure the diameter of the centre bore using a tape measure or calliper.
Do Tacomas and 4Runners have the same wheels?
Will Tacoma TRD Pro Wheels Fit On A 4Runner? No. TRD Pro wheels made for Tacomas won’t fit on a 4Runner. It’s because the 4Runner’s brake rotors and calipers are too large to be cleared by 16″ wheels made for Tacomas.
How do I know my hub bore size?
To measure your centre bore and choose the right hub-centric rings, follow these steps: Find the centre bore on your vehicle’s wheels. It’s the circular opening in the middle of the wheel that fits over the hub on your vehicle’s axle. Measure the diameter of the centre bore using a tape measure or calliper.
What size are the OEM wheels on a 2000 Toyota 4Runner?
2000 Toyota 4Runner OEM Wheels OEM 16×8 +1 | Michelin LTX M/S2 265/75 | OEM Stock
Wheel Info | |
---|---|
Front: 16×8 Offset: 1 Backspacing: 4.5 | Rear: 16×8 Offset: 1 Backspacing: 4.5 |
Tire Info | |
Michelin LTX M/S2 | |
Front: 265/75 31.6″x10.4″ | Rear: 265/75 31.6″x10.4″ |
What is the bolt pattern on a 1999 Toyota 4Runner?
Toyota 4Runner [1989-2022] – Bolt pattern 6×139.
Does hub bore size have to be exact?
While you can fit a larger hub bore on a smaller hub, you can’t fit a smaller hub bore on a larger hub. Be sure you have the correct hub bore size before installing your rims! While lug-centric wheels are centered around the lug nuts rather than the hub bore, they can be safely installed without worry.
What is the center bore of a 4Runner?
106.1 mm
TOYOTA 4RUNNER 2010-2022 – WHEELS
Bolt Pattern (PCD) | 6×139.7 | Wheel size and offset explained |
---|---|---|
Center Bore | 106.1 mm | Hub centric rings recommended on all wheels with bigger centerbore than OE. Prevent vibration at higher speed. |
Wheel fasteners | Nuts | Torque = 83 lbs/ft |
What is the hub center bore size?
The outer diameter is the hub bore, while the inner diameter is the diameter of the vehicle hub itself. For example: a hub-centric ring size of 73-67.1 would mean that the wheel center bore is 73 mm wide and the vehicle hub is 67.1 mm wide.